Add dts nodes for apps_smmu and USB for both sm8150 and sm8250. Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a few changes. Notably, the HDK865 dts has regulator config changed a bit based on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150). Jonathan Marek (6): arm64: dts: qcom: sm8150: add apps_smmu node arm64: dts: qcom: sm8250: add apps_smmu node arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes arm64: dts: qcom: sm8250: Add USB and PHY device nodes arm64: dts: qcom: add sm8150 hdk dts arm64: dts: qcom: add sm8250 hdk dts arch/arm64/boot/dts/qcom/Makefile | 2 + arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 461 ++++++++++++++++++++++++ arch/arm64/boot/dts/qcom/sm8150.dtsi | 180 +++++++++ arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 454 +++++++++++++++++++++++ arch/arm64/boot/dts/qcom/sm8250.dtsi | 287 +++++++++++++++ 5 files changed, 1384 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8150-hdk.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts -- 2.26.1
