Re: [PATCH 0/6] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Sat, May 23, 2020 at 10:38:06PM -0400, Jonathan Marek wrote:
> Add dts nodes for apps_smmu and USB for both sm8150 and sm8250.
> 

I've tested this series on an SM8250 based board and able to get Type C (USB0)
working. There are also couple of Type A ports (USB1) on that board behind a
USB hub. It is probing fine but I don't see any activity while connecting a
USB device. Will continue to debug and once I get them working, I'll add my
Tested-by tag.

Thanks,
Mani

> Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a
> few changes. Notably, the HDK865 dts has regulator config changed a bit based
> on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150).
> 
> Jonathan Marek (6):
>   arm64: dts: qcom: sm8150: add apps_smmu node
>   arm64: dts: qcom: sm8250: add apps_smmu node
>   arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes
>   arm64: dts: qcom: sm8250: Add USB and PHY device nodes
>   arm64: dts: qcom: add sm8150 hdk dts
>   arm64: dts: qcom: add sm8250 hdk dts
> 
>  arch/arm64/boot/dts/qcom/Makefile       |   2 +
>  arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 461 ++++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/sm8150.dtsi    | 180 +++++++++
>  arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 454 +++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/sm8250.dtsi    | 287 +++++++++++++++
>  5 files changed, 1384 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sm8150-hdk.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts
> 
> -- 
> 2.26.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux