Re: [PATCH 0/6] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat 23 May 19:38 PDT 2020, Jonathan Marek wrote:

> Add dts nodes for apps_smmu and USB for both sm8150 and sm8250.
> 
> Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a
> few changes. Notably, the HDK865 dts has regulator config changed a bit based
> on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150).

Can you please elaborate on this discrepancy? I do remember seeing
something odd when looking at this, but it seems like I didn't document
it anywhere...

Thanks,
Bjorn

> 
> Jonathan Marek (6):
>   arm64: dts: qcom: sm8150: add apps_smmu node
>   arm64: dts: qcom: sm8250: add apps_smmu node
>   arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes
>   arm64: dts: qcom: sm8250: Add USB and PHY device nodes
>   arm64: dts: qcom: add sm8150 hdk dts
>   arm64: dts: qcom: add sm8250 hdk dts
> 
>  arch/arm64/boot/dts/qcom/Makefile       |   2 +
>  arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 461 ++++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/sm8150.dtsi    | 180 +++++++++
>  arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 454 +++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/sm8250.dtsi    | 287 +++++++++++++++
>  5 files changed, 1384 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sm8150-hdk.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts
> 
> -- 
> 2.26.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux