On 5/28/20 11:05 PM, Bjorn Andersson wrote:
On Sat 23 May 19:38 PDT 2020, Jonathan Marek wrote:
Add dts nodes for apps_smmu and USB for both sm8150 and sm8250.
Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a
few changes. Notably, the HDK865 dts has regulator config changed a bit based
on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150).
Can you please elaborate on this discrepancy? I do remember seeing
something odd when looking at this, but it seems like I didn't document
it anywhere...
Thanks,
Bjorn
Mainly there's a few regulators with different min/max voltage values.
For example with l16a, downstream has min/max 3024000/3304000 but
upstream sm8250-mtp has 2704000/2960000. I also added l18a.
Jonathan Marek (6):
arm64: dts: qcom: sm8150: add apps_smmu node
arm64: dts: qcom: sm8250: add apps_smmu node
arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes
arm64: dts: qcom: sm8250: Add USB and PHY device nodes
arm64: dts: qcom: add sm8150 hdk dts
arm64: dts: qcom: add sm8250 hdk dts
arch/arm64/boot/dts/qcom/Makefile | 2 +
arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 461 ++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sm8150.dtsi | 180 +++++++++
arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 454 +++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sm8250.dtsi | 287 +++++++++++++++
5 files changed, 1384 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm8150-hdk.dts
create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts
--
2.26.1
