On Fri, Mar 13, 2020 at 09:32:27AM +0100, Johan Jonker wrote: > Hi Vivek, > > The 'power-led' need some changes. > > From leds-gpio.yaml: > > patternProperties: > # The first form is preferred, but fall back to just 'led' anywhere in the > # node name to at least catch some child nodes. > "(^led-[0-9a-f]$|led)": > type: object > > Test with: > make -k ARCH=arm64 dtbs_check > > arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dt.yaml: leds: > power-led:linux,default-trigger:0: 'none' is not one of ['backlight', > 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern'] > > On 3/13/20 1:01 AM, Vivek Unune wrote: > > - Add Hugsun X99 IR receiver and power led > > - Remove pwm0 node as it interferes with pwer LED gpio > > pwer => power > Hi Johan, I'll fix those in my next version. Here's what I intended to to: 1. Rename 'power-led' node to 'led-power' 2. Remove 'linux,default-trigger' entirely since this led is always on Thanks, Vivek > > index d69a613fb65a..df425e164a2e 100644 > > --- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts > > +++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts > > @@ -29,6 +29,26 @@ > > regulator-max-microvolt = <5000000>; > > }; > > > > + leds { > > + compatible = "gpio-leds"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&power_led_gpio>; > > + > > + power-led { > > + label = "blue:power"; > > + gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; > > + default-state = "on"; > > + linux,default-trigger = "none"; > > + }; > > + }; > > +