On Thu, Feb 27, 2020 at 11:08:58AM -0600, Rob Herring wrote: > On Thu, 27 Feb 2020 09:52:36 +0000, Russell King wrote: > > Add a DT bindings document for the Marvell 10G driver, which will > > augment the generic ethernet PHY binding by having LED mode > > configuration. > > > > Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx> > > --- > > .../devicetree/bindings/net/marvell,10g.yaml | 31 +++++++++++++++++++ > > 1 file changed, 31 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/net/marvell,10g.yaml > > > > My bot found errors running 'make dt_binding_check' on your patch: > > Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node > Documentation/devicetree/bindings/net/marvell,10g.example.dts:18.13-23: Warning (reg_format): /example-0/ethernet-phy@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) > Documentation/devicetree/bindings/net/marvell,10g.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' > Documentation/devicetree/bindings/net/marvell,10g.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' > Documentation/devicetree/bindings/net/marvell,10g.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' It looks like your bot has made a mistake, or I don't understand the error messages. It seems to be trying to treat the example as a PCI device, but it isn't, it is a PHY device. I don't think that's something I can fix, sorry. -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up According to speedtest.net: 11.9Mbps down 500kbps up
