Hi, This series makes it possible to configure the PHY LEDs on the Marvell 88x3310 and similar PHYs. We introduce a new DT property called "marvell,led-mode" which allows the register values (up to four) for the LEDs to be given and programmed into the PHY by the driver. .../devicetree/bindings/net/marvell,10g.yaml | 31 +++++++++++ arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 2 + drivers/net/phy/marvell10g.c | 62 +++++++++++++++++++--- 3 files changed, 88 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/marvell,10g.yaml -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up According to speedtest.net: 11.9Mbps down 500kbps up
