Configure the Macchiatobin 10G PHY LED modes to correct their polarity.
We keep the existing LED behaviours, but switch their polarity to
reflect how they are connected. Tweak the LED modes as well to be:
left: off = no link
solid green = RJ45 link up (not SFP+ cage)
flash green = traffic
right: off = no link
solid green = 10G
solid yellow = 1G
flash green = 100M
flash yellow = 10M
Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index d06f5ab7ddab..87a3149a4261 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -21,12 +21,14 @@
compatible = "ethernet-phy-ieee802.3-c45";
reg = <0>;
sfp = <&sfp_eth0>;
+ marvell,led-mode = /bits/ 16 <0x0129 0x095d 0x0855>;
};
phy8: ethernet-phy@8 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <8>;
sfp = <&sfp_eth1>;
+ marvell,led-mode = /bits/ 16 <0x0129 0x095d 0x0855>;
};
};
--
2.20.1
