Add a DT bindings document for the Marvell 10G driver, which will augment the generic ethernet PHY binding by having LED mode configuration. Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx> --- .../devicetree/bindings/net/marvell,10g.yaml | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/marvell,10g.yaml diff --git a/Documentation/devicetree/bindings/net/marvell,10g.yaml b/Documentation/devicetree/bindings/net/marvell,10g.yaml new file mode 100644 index 000000000000..da597fc5314d --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell,10g.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0+ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/marvell,10g.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Alaska X family Ethernet PHYs + +maintainers: + - Russell King <rmk+kernel@xxxxxxxxxxxxxxx> + +allOf: + - $ref: ethernet-phy.yaml# + +properties: + marvell,led-mode: + description: | + An array of one to four 16-bit integers to write to the PHY LED + configuration registers. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint16-array + - minItems: 1 + maxItems: 4 + +examples: + - | + ethernet-phy@0 { + reg = <0>; + compatible = "ethernet-phy-ieee802.3-c45"; + marvell,led-mode = /bits/ 16 <0x0129 0x095d 0x0855>; + }; -- 2.20.1
