On Thu, 27 Feb 2020 09:52:36 +0000, Russell King wrote: > Add a DT bindings document for the Marvell 10G driver, which will > augment the generic ethernet PHY binding by having LED mode > configuration. > > Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx> > --- > .../devicetree/bindings/net/marvell,10g.yaml | 31 +++++++++++++++++++ > 1 file changed, 31 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/marvell,10g.yaml > My bot found errors running 'make dt_binding_check' on your patch: Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node Documentation/devicetree/bindings/net/marvell,10g.example.dts:18.13-23: Warning (reg_format): /example-0/ethernet-phy@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) Documentation/devicetree/bindings/net/marvell,10g.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/net/marvell,10g.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/net/marvell,10g.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' See https://patchwork.ozlabs.org/patch/1245687 Please check and re-submit.
