Hi Michael, On Mon, 24 Feb 2020 at 13:38, Michael Walle <michael@xxxxxxxx> wrote: > > Hi Shawn, > > Am 2020-02-24 12:20, schrieb Shawn Guo: > > On Sun, Feb 23, 2020 at 10:47:10PM +0200, Vladimir Oltean wrote: > >> This series officializes the device tree bindings for the embedded > >> Ethernet switch on NXP LS1028A (and for the reference design board). > >> The driver has been in the tree since v5.4-rc6. > >> > >> It also performs some DT binding changes and minor cleanup, as per > >> feedback received in v1 and v2: > >> > >> - I've changed the DT bindings for the internal ports from "gmii" to > >> "internal". This means changing the ENETC phy-mode as well, for > >> uniformity. So I would like the entire series to be merged through a > >> single tree, probably the devicetree one - something which David > >> Miller has aggreed to, here [0]. > >> - Disabled all Ethernet ports in the LS1028A DTSI by default, which > >> means not only the newly introduced switch ports, but also RGMII > >> standalone port 1. > >> > >> [0]: https://lkml.org/lkml/2020/2/19/973 > >> > >> Claudiu Manoil (2): > >> arm64: dts: fsl: ls1028a: add node for Felix switch > >> arm64: dts: fsl: ls1028a: enable switch PHYs on RDB > >> > >> Vladimir Oltean (4): > >> arm64: dts: fsl: ls1028a: delete extraneous #interrupt-cells for > >> ENETC > >> RCIE > >> arm64: dts: fsl: ls1028a: disable all enetc ports by default > > > > I applied these 4 DTS patches with changing prefix to 'arm64: dts: > > ls1028a: '. > > Oh, then the kontron-sl28 boards won't have ethernet because the nodes > are > disabled now. I'll send a patch shortly which explicitly sets the status > to > "okay", hopefully you can pick it up so it'll end up in the same pull > request > as this one: > > arm64: dts: fsl: ls1028a: disable all enetc ports by default > Sorry, I didn't notice your board. > -michael > > > > > Shawn > > > >> net: dsa: felix: Use PHY_INTERFACE_MODE_INTERNAL instead of GMII > >> dt-bindings: net: dsa: ocelot: document the vsc9959 core > >> > >> .../devicetree/bindings/net/dsa/ocelot.txt | 116 > >> ++++++++++++++++++ > >> .../boot/dts/freescale/fsl-ls1028a-qds.dts | 1 + > >> .../boot/dts/freescale/fsl-ls1028a-rdb.dts | 61 ++++++++- > >> .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 89 +++++++++++++- > >> drivers/net/dsa/ocelot/felix.c | 3 +- > >> drivers/net/dsa/ocelot/felix_vsc9959.c | 3 +- > >> 6 files changed, 265 insertions(+), 8 deletions(-) > >> create mode 100644 > >> Documentation/devicetree/bindings/net/dsa/ocelot.txt > >> > >> -- > >> 2.17.1 > >> Regards, -Vladimir
