Re: [PATCH v3 devicetree 0/6] DT bindings for Felix DSA switch on LS1028A

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Shawn,

Am 2020-02-24 12:20, schrieb Shawn Guo:
On Sun, Feb 23, 2020 at 10:47:10PM +0200, Vladimir Oltean wrote:
This series officializes the device tree bindings for the embedded
Ethernet switch on NXP LS1028A (and for the reference design board).
The driver has been in the tree since v5.4-rc6.

It also performs some DT binding changes and minor cleanup, as per
feedback received in v1 and v2:

- I've changed the DT bindings for the internal ports from "gmii" to
  "internal". This means changing the ENETC phy-mode as well, for
  uniformity. So I would like the entire series to be merged through a
  single tree, probably the devicetree one - something which David
  Miller has aggreed to, here [0].
- Disabled all Ethernet ports in the LS1028A DTSI by default, which
  means not only the newly introduced switch ports, but also RGMII
  standalone port 1.

[0]: https://lkml.org/lkml/2020/2/19/973

Claudiu Manoil (2):
  arm64: dts: fsl: ls1028a: add node for Felix switch
  arm64: dts: fsl: ls1028a: enable switch PHYs on RDB

Vladimir Oltean (4):
arm64: dts: fsl: ls1028a: delete extraneous #interrupt-cells for ENETC
    RCIE
  arm64: dts: fsl: ls1028a: disable all enetc ports by default

I applied these 4 DTS patches with changing prefix to 'arm64: dts: ls1028a: '.

Oh, then the kontron-sl28 boards won't have ethernet because the nodes are disabled now. I'll send a patch shortly which explicitly sets the status to "okay", hopefully you can pick it up so it'll end up in the same pull request
as this one:

  arm64: dts: fsl: ls1028a: disable all enetc ports by default

-michael


Shawn

  net: dsa: felix: Use PHY_INTERFACE_MODE_INTERNAL instead of GMII
  dt-bindings: net: dsa: ocelot: document the vsc9959 core

.../devicetree/bindings/net/dsa/ocelot.txt | 116 ++++++++++++++++++
 .../boot/dts/freescale/fsl-ls1028a-qds.dts    |   1 +
 .../boot/dts/freescale/fsl-ls1028a-rdb.dts    |  61 ++++++++-
 .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi |  89 +++++++++++++-
 drivers/net/dsa/ocelot/felix.c                |   3 +-
 drivers/net/dsa/ocelot/felix_vsc9959.c        |   3 +-
 6 files changed, 265 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/dsa/ocelot.txt

--
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux