This series officializes the device tree bindings for the embedded Ethernet switch on NXP LS1028A (and for the reference design board). The driver has been in the tree since v5.4-rc6. It also performs some DT binding changes and minor cleanup, as per feedback received in v1 and v2: - I've changed the DT bindings for the internal ports from "gmii" to "internal". This means changing the ENETC phy-mode as well, for uniformity. So I would like the entire series to be merged through a single tree, probably the devicetree one - something which David Miller has aggreed to, here [0]. - Disabled all Ethernet ports in the LS1028A DTSI by default, which means not only the newly introduced switch ports, but also RGMII standalone port 1. [0]: https://lkml.org/lkml/2020/2/19/973 Claudiu Manoil (2): arm64: dts: fsl: ls1028a: add node for Felix switch arm64: dts: fsl: ls1028a: enable switch PHYs on RDB Vladimir Oltean (4): arm64: dts: fsl: ls1028a: delete extraneous #interrupt-cells for ENETC RCIE arm64: dts: fsl: ls1028a: disable all enetc ports by default net: dsa: felix: Use PHY_INTERFACE_MODE_INTERNAL instead of GMII dt-bindings: net: dsa: ocelot: document the vsc9959 core .../devicetree/bindings/net/dsa/ocelot.txt | 116 ++++++++++++++++++ .../boot/dts/freescale/fsl-ls1028a-qds.dts | 1 + .../boot/dts/freescale/fsl-ls1028a-rdb.dts | 61 ++++++++- .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 89 +++++++++++++- drivers/net/dsa/ocelot/felix.c | 3 +- drivers/net/dsa/ocelot/felix_vsc9959.c | 3 +- 6 files changed, 265 insertions(+), 8 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/dsa/ocelot.txt -- 2.17.1
