On Sun, Feb 23, 2020 at 10:47:10PM +0200, Vladimir Oltean wrote: > This series officializes the device tree bindings for the embedded > Ethernet switch on NXP LS1028A (and for the reference design board). > The driver has been in the tree since v5.4-rc6. > > It also performs some DT binding changes and minor cleanup, as per > feedback received in v1 and v2: > > - I've changed the DT bindings for the internal ports from "gmii" to > "internal". This means changing the ENETC phy-mode as well, for > uniformity. So I would like the entire series to be merged through a > single tree, probably the devicetree one - something which David > Miller has aggreed to, here [0]. > - Disabled all Ethernet ports in the LS1028A DTSI by default, which > means not only the newly introduced switch ports, but also RGMII > standalone port 1. > > [0]: https://lkml.org/lkml/2020/2/19/973 > > Claudiu Manoil (2): > arm64: dts: fsl: ls1028a: add node for Felix switch > arm64: dts: fsl: ls1028a: enable switch PHYs on RDB > > Vladimir Oltean (4): > arm64: dts: fsl: ls1028a: delete extraneous #interrupt-cells for ENETC > RCIE > arm64: dts: fsl: ls1028a: disable all enetc ports by default I applied these 4 DTS patches with changing prefix to 'arm64: dts: ls1028a: '. Shawn > net: dsa: felix: Use PHY_INTERFACE_MODE_INTERNAL instead of GMII > dt-bindings: net: dsa: ocelot: document the vsc9959 core > > .../devicetree/bindings/net/dsa/ocelot.txt | 116 ++++++++++++++++++ > .../boot/dts/freescale/fsl-ls1028a-qds.dts | 1 + > .../boot/dts/freescale/fsl-ls1028a-rdb.dts | 61 ++++++++- > .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 89 +++++++++++++- > drivers/net/dsa/ocelot/felix.c | 3 +- > drivers/net/dsa/ocelot/felix_vsc9959.c | 3 +- > 6 files changed, 265 insertions(+), 8 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/dsa/ocelot.txt > > -- > 2.17.1 >
