[PATCH 4/4] i3c: master: dw: reattach device on first available location of address table

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For today the reattach function only update the device address on the
controller.

Update the location to the first available too, will optimize the
enumeration process avoiding additional checks to keep the available
positions on address table consecutive.

Signed-off-by: Vitor Soares <vitor.soares@xxxxxxxxxxxx>
---
 drivers/i3c/master/dw-i3c-master.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/i3c/master/dw-i3c-master.c b/drivers/i3c/master/dw-i3c-master.c
index 1d83c97..62261ac 100644
--- a/drivers/i3c/master/dw-i3c-master.c
+++ b/drivers/i3c/master/dw-i3c-master.c
@@ -898,6 +898,22 @@ static int dw_i3c_master_reattach_i3c_dev(struct i3c_dev_desc *dev,
 	struct dw_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev);
 	struct i3c_master_controller *m = i3c_dev_get_master(dev);
 	struct dw_i3c_master *master = to_dw_i3c_master(m);
+	int pos;
+
+	pos = dw_i3c_master_get_free_pos(master);
+
+	if (data->index > pos && pos > 0) {
+		writel(0,
+		       master->regs +
+		       DEV_ADDR_TABLE_LOC(master->datstartaddr, data->index));
+
+		master->addrs[data->index] = 0;
+		master->free_pos |= BIT(data->index);
+
+		data->index = pos;
+		master->addrs[pos] = dev->info.dyn_addr;
+		master->free_pos &= ~BIT(pos);
+	}
 
 	writel(DEV_ADDR_TABLE_DYNAMIC_ADDR(dev->info.dyn_addr),
 	       master->regs +
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux