This patch series remove the devices that fail during pre_assign_dyn_addr() and were being sent on DEFSVLS command. With the change above, during the i3c_master_add_i3c_dev_locked() is necessary to check if the device has i3c_boardinfo and try to assign the i3c_dev_boardinfo->init_dyn_addr if there no oldev. This change will allow to describe in DT device with preferable dynamic address but without static address. Vitor Soares (4): "i3c: detach and free device if pre_assign_dyn_addr fails " i3c: check i3c_boardinfo during i3c_master_add_i3c_dev_locked update i3c bingins i3c: master: dw: Reattach device on first empty location of DAT Documentation/devicetree/bindings/i3c/i3c.txt | 13 ++++++++--- drivers/i3c/master.c | 33 ++++++++++++++++++++++++--- drivers/i3c/master/dw-i3c-master.c | 16 +++++++++++++ 3 files changed, 56 insertions(+), 6 deletions(-) -- 2.7.4
