The I3C devices described in DT might not be attached to the master which
doesn't allow to assign a specific dynamic address.
This patch check if a device has i3c_dev_boardinfo and add it to
i3c_dev_desc structure. In this conditions, the framework will try to
assign the i3c_dev_boardinfo->init_dyn_addr even if stactic address = 0.
Signed-off-by: Vitor Soares <vitor.soares@xxxxxxxxxxxx>
---
drivers/i3c/master.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index 4d29e1f..85fbda6 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -1795,6 +1795,23 @@ i3c_master_search_i3c_dev_duplicate(struct i3c_dev_desc *refdev)
return NULL;
}
+static struct i3c_dev_boardinfo *
+i3c_master_search_i3c_boardinfo(struct i3c_dev_desc *dev)
+{
+ struct i3c_master_controller *master = i3c_dev_get_master(dev);
+ struct i3c_dev_boardinfo *boardinfo;
+
+ if (dev->boardinfo)
+ return NULL;
+
+ list_for_each_entry(boardinfo, &master->boardinfo.i3c, node) {
+ if (dev->info.pid == boardinfo->pid)
+ return boardinfo;
+ }
+
+ return NULL;
+}
+
/**
* i3c_master_add_i3c_dev_locked() - add an I3C slave to the bus
* @master: master used to send frames on the bus
@@ -1816,6 +1833,7 @@ int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
{
struct i3c_device_info info = { .dyn_addr = addr };
struct i3c_dev_desc *newdev, *olddev;
+ struct i3c_dev_boardinfo *boardinfo;
u8 old_dyn_addr = addr, expected_dyn_addr;
struct i3c_ibi_setup ibireq = { };
bool enable_ibi = false;
@@ -1875,6 +1893,10 @@ int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
if (ret)
goto err_detach_dev;
+ boardinfo = i3c_master_search_i3c_boardinfo(newdev);
+ if (boardinfo)
+ newdev->boardinfo = boardinfo;
+
/*
* Depending on our previous state, the expected dynamic address might
* differ:
--
2.7.4
