Re: [PATCH 2/4] i3c: master: Check if devices have i3c_dev_boardinfo on i3c_master_add_i3c_dev_locked()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 29 Aug 2019 12:19:33 +0200
Vitor Soares <Vitor.Soares@xxxxxxxxxxxx> wrote:

> The I3C devices described in DT might not be attached to the master which
> doesn't allow to assign a specific dynamic address.

I remember testing this when developing the framework, so, unless
another patch regressed it, it should already work. I suspect patch 1
is actually the regressing this use case.

> 
> This patch check if a device has i3c_dev_boardinfo and add it to
> i3c_dev_desc structure. In this conditions, the framework will try to
> assign the i3c_dev_boardinfo->init_dyn_addr even if stactic address = 0.
> 
> Signed-off-by: Vitor Soares <vitor.soares@xxxxxxxxxxxx>
> ---
>  drivers/i3c/master.c | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
> index 4d29e1f..85fbda6 100644
> --- a/drivers/i3c/master.c
> +++ b/drivers/i3c/master.c
> @@ -1795,6 +1795,23 @@ i3c_master_search_i3c_dev_duplicate(struct i3c_dev_desc *refdev)
>  	return NULL;
>  }
>  
> +static struct i3c_dev_boardinfo *
> +i3c_master_search_i3c_boardinfo(struct i3c_dev_desc *dev)
> +{
> +	struct i3c_master_controller *master = i3c_dev_get_master(dev);
> +	struct i3c_dev_boardinfo *boardinfo;
> +
> +	if (dev->boardinfo)
> +		return NULL;
> +
> +	list_for_each_entry(boardinfo, &master->boardinfo.i3c, node) {
> +		if (dev->info.pid == boardinfo->pid)
> +			return boardinfo;
> +	}
> +
> +	return NULL;
> +}
> +
>  /**
>   * i3c_master_add_i3c_dev_locked() - add an I3C slave to the bus
>   * @master: master used to send frames on the bus
> @@ -1816,6 +1833,7 @@ int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
>  {
>  	struct i3c_device_info info = { .dyn_addr = addr };
>  	struct i3c_dev_desc *newdev, *olddev;
> +	struct i3c_dev_boardinfo *boardinfo;
>  	u8 old_dyn_addr = addr, expected_dyn_addr;
>  	struct i3c_ibi_setup ibireq = { };
>  	bool enable_ibi = false;
> @@ -1875,6 +1893,10 @@ int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
>  	if (ret)
>  		goto err_detach_dev;
>  
> +	boardinfo = i3c_master_search_i3c_boardinfo(newdev);
> +	if (boardinfo)
> +		newdev->boardinfo = boardinfo;
> +
>  	/*
>  	 * Depending on our previous state, the expected dynamic address might
>  	 * differ:




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux