From: Omri Itach <omrii@xxxxxxxxxxx> Add dynamic AP-DCLK clock (hclk) to system controller driver. AP-DCLK is half the rate of DDR clock, so its derrived from Sample At Reset configuration. The clock frequency is required for AP806 AXI monitor profiling feature. Signed-off-by: Omri Itach <omrii@xxxxxxxxxxx> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> --- drivers/clk/mvebu/ap806-system-controller.c | 48 ++++++++++++++++++++- 1 file changed, 46 insertions(+), 2 deletions(-) diff --git a/drivers/clk/mvebu/ap806-system-controller.c b/drivers/clk/mvebu/ap806-system-controller.c index 2cf874f01394..bc43adff02e0 100644 --- a/drivers/clk/mvebu/ap806-system-controller.c +++ b/drivers/clk/mvebu/ap806-system-controller.c @@ -21,7 +21,7 @@ #define AP806_SAR_REG 0x400 #define AP806_SAR_CLKFREQ_MODE_MASK 0x1f -#define AP806_CLK_NUM 5 +#define AP806_CLK_NUM 6 static struct clk *ap806_clks[AP806_CLK_NUM]; @@ -33,7 +33,7 @@ static struct clk_onecell_data ap806_clk_data = { static int ap806_syscon_common_probe(struct platform_device *pdev, struct device_node *syscon_node) { - unsigned int freq_mode, cpuclk_freq; + unsigned int freq_mode, cpuclk_freq, dclk_freq; const char *name, *fixedclk_name; struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; @@ -93,8 +93,42 @@ static int ap806_syscon_common_probe(struct platform_device *pdev, return -EINVAL; } + /* Get DCLK frequency (DCLK = DDR_CLK / 2) */ + switch (freq_mode) { + case 0x0: + case 0x6: + /* DDR_CLK = 1200Mhz */ + dclk_freq = 600; + break; + case 0x1: + case 0x7: + case 0xD: + /* DDR_CLK = 1050Mhz */ + dclk_freq = 525; + break; + case 0x13: + case 0x17: + /* DDR_CLK = 650Mhz */ + dclk_freq = 325; + break; + case 0x4: + case 0x14: + case 0x19: + case 0x1A: + case 0x1B: + case 0x1C: + case 0x1D: + /* DDR_CLK = 800Mhz */ + dclk_freq = 400; + break; + default: + dclk_freq = 0; + dev_err(dev, "invalid Sample at Reset value\n"); + } + /* Convert to hertz */ cpuclk_freq *= 1000 * 1000; + dclk_freq *= 1000 * 1000; /* CPU clocks depend on the Sample At Reset configuration */ name = ap_cp_unique_name(dev, syscon_node, "pll-cluster-0"); @@ -141,6 +175,14 @@ static int ap806_syscon_common_probe(struct platform_device *pdev, goto fail4; } + /* AP-DCLK(HCLK) Clock is DDR clock divided by 2 */ + name = ap_cp_unique_name(dev, syscon_node, "ap-dclk"); + ap806_clks[5] = clk_register_fixed_rate(dev, name, NULL, 0, dclk_freq); + if (IS_ERR(ap806_clks[5])) { + ret = PTR_ERR(ap806_clks[5]); + goto fail5; + } + ret = of_clk_add_provider(np, of_clk_src_onecell_get, &ap806_clk_data); if (ret) goto fail_clk_add; @@ -148,6 +190,8 @@ static int ap806_syscon_common_probe(struct platform_device *pdev, return 0; fail_clk_add: + clk_unregister_fixed_factor(ap806_clks[5]); +fail5: clk_unregister_fixed_factor(ap806_clks[4]); fail4: clk_unregister_fixed_factor(ap806_clks[3]); -- 2.20.1