From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> This series adds drive strenght and slew rate support for SAMX60's pin controller. For drive strenght we could have 2 values: low, high. For slew rate we could have 2 values: enable, disabled. Besides this I took the chance and adapt the documentation for at91 pinctrl driver. Changes in v2: - s/microchip,sam9x60-pictrl/microchip,sam9x60-pinctrl in patches 3/7, 5/7 Claudiu Beznea (7): pinctrl: at91: add option to use drive strength bits pinctrl: at91: add drive strength support for SAM9X60 pinctrl: at91: add compatibles for SAM9X60 pin controller dt-bindings: add documentation for banks dt-bindings: add bindings for SAM9X60 pinctrl: at91: add slewrate support for SAM9X60 dt-bindings: add documentation for slew rate .../bindings/pinctrl/atmel,at91-pinctrl.txt | 27 ++++- drivers/pinctrl/pinctrl-at91.c | 134 +++++++++++++++++++-- drivers/pinctrl/pinctrl-at91.h | 3 + include/dt-bindings/pinctrl/at91.h | 4 + 4 files changed, 155 insertions(+), 13 deletions(-) -- 2.7.4
