On Thu, Jan 31, 2019 at 05:18:00PM +0100, Claudiu Beznea - M18063 wrote: > From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> Minor comment for patch 1. Acked-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx> for the whole series. > > This series adds drive strenght and slew rate support for SAMX60's pin > controller. For drive strenght we could have 2 values: low, high. > For slew rate we could have 2 values: enable, disabled. > > Besides this I took the chance and adapt the documentation for at91 pinctrl > driver. > > Changes in v2: > - s/microchip,sam9x60-pictrl/microchip,sam9x60-pinctrl in patches 3/7, 5/7 > > Claudiu Beznea (7): > pinctrl: at91: add option to use drive strength bits > pinctrl: at91: add drive strength support for SAM9X60 > pinctrl: at91: add compatibles for SAM9X60 pin controller > dt-bindings: add documentation for banks > dt-bindings: add bindings for SAM9X60 > pinctrl: at91: add slewrate support for SAM9X60 > dt-bindings: add documentation for slew rate > > .../bindings/pinctrl/atmel,at91-pinctrl.txt | 27 ++++- > drivers/pinctrl/pinctrl-at91.c | 134 +++++++++++++++++++-- > drivers/pinctrl/pinctrl-at91.h | 3 + > include/dt-bindings/pinctrl/at91.h | 4 + > 4 files changed, 155 insertions(+), 13 deletions(-) > > -- > 2.7.4 >
