Re: [PATCH v2 2/2] media: atmel-isc: Update device tree binding documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 18.01.2019 20:05, Ken Sloat wrote:
>> -----Original Message-----
>> From: Eugen.Hristev@xxxxxxxxxxxxx <Eugen.Hristev@xxxxxxxxxxxxx>
>> Sent: Friday, January 18, 2019 9:40 AM
>> To: Ken Sloat <KSloat@xxxxxxxxxxxxxx>
>> Cc: mchehab@xxxxxxxxxx; Nicolas.Ferre@xxxxxxxxxxxxx;
>> alexandre.belloni@xxxxxxxxxxx; Ludovic.Desroches@xxxxxxxxxxxxx; linux-
>> media@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx
>> Subject: Re: [PATCH v2 2/2] media: atmel-isc: Update device tree binding
>> documentation
>>
>>
>>
>> On 18.01.2019 16:28, Ken Sloat wrote:
>>> From: Ken Sloat <ksloat@xxxxxxxxxxxxxx>
>>>
>>> Update device tree binding documentation specifying how to enable
>>> BT656 with CRC decoding.
>>>
>>> Signed-off-by: Ken Sloat <ksloat@xxxxxxxxxxxxxx>
>>> ---
>>>    Changes in v2:
>>>    -Use correct media "bus-type" dt property.
>>>
>>>    Documentation/devicetree/bindings/media/atmel-isc.txt | 5 +++++
>>>    1 file changed, 5 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/media/atmel-isc.txt
>>> b/Documentation/devicetree/bindings/media/atmel-isc.txt
>>> index bbe0e87c6188..2d4378dfd6c8 100644
>>> --- a/Documentation/devicetree/bindings/media/atmel-isc.txt
>>> +++ b/Documentation/devicetree/bindings/media/atmel-isc.txt
>>> @@ -21,6 +21,11 @@ Required properties for ISC:
>>>    - pinctrl-names, pinctrl-0
>>>    	Please refer to pinctrl-bindings.txt.
>>>
>>> +Optional properties for ISC:
>>> +- bus-type
>>> +	When set to 6, Bt.656 decoding (embedded sync) with CRC decoding
>>> +	is enabled.
>>> +
>>
>> I don't think this patch is required at all actually, the binding complies to the
>> video-interfaces bus specification which includes the parallel and bt.656.
>>
>> Would be worth mentioning below explicitly that parallel and bt.656 are
>> supported, or added above that also plain parallel bus is supported ?
>>
>>>    ISC supports a single port node with parallel bus. It should contain
>>> one
>>
>> here inside the previous line
> Hi Eugen,
> 
> Yes it's true adding new documentation here may be overkill, but yes it should say something
> (as a user I always find it helpful if the docs are more verbose than not).
> 
> So per your suggestion, how about the simplified:
> "ISC supports a single port node with parallel bus and optionally Bt.656 support."
> 
> and I'll remit the other statements.

That's fine with me, I will let Rob have his opinion heard as well.

Thanks again,

Eugen

> 
>>>    'port' child node with child 'endpoint' node. Please refer to the bindings
>>>    defined in Documentation/devicetree/bindings/media/video-
>> interfaces.txt.
>>>
> 
> Thanks,
> Ken
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux