RE: [PATCH v2 2/2] media: atmel-isc: Update device tree binding documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Eugen.Hristev@xxxxxxxxxxxxx <Eugen.Hristev@xxxxxxxxxxxxx>
> Sent: Friday, January 18, 2019 9:40 AM
> To: Ken Sloat <KSloat@xxxxxxxxxxxxxx>
> Cc: mchehab@xxxxxxxxxx; Nicolas.Ferre@xxxxxxxxxxxxx;
> alexandre.belloni@xxxxxxxxxxx; Ludovic.Desroches@xxxxxxxxxxxxx; linux-
> media@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH v2 2/2] media: atmel-isc: Update device tree binding
> documentation
> 
> 
> 
> On 18.01.2019 16:28, Ken Sloat wrote:
> > From: Ken Sloat <ksloat@xxxxxxxxxxxxxx>
> >
> > Update device tree binding documentation specifying how to enable
> > BT656 with CRC decoding.
> >
> > Signed-off-by: Ken Sloat <ksloat@xxxxxxxxxxxxxx>
> > ---
> >   Changes in v2:
> >   -Use correct media "bus-type" dt property.
> >
> >   Documentation/devicetree/bindings/media/atmel-isc.txt | 5 +++++
> >   1 file changed, 5 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/media/atmel-isc.txt
> > b/Documentation/devicetree/bindings/media/atmel-isc.txt
> > index bbe0e87c6188..2d4378dfd6c8 100644
> > --- a/Documentation/devicetree/bindings/media/atmel-isc.txt
> > +++ b/Documentation/devicetree/bindings/media/atmel-isc.txt
> > @@ -21,6 +21,11 @@ Required properties for ISC:
> >   - pinctrl-names, pinctrl-0
> >   	Please refer to pinctrl-bindings.txt.
> >
> > +Optional properties for ISC:
> > +- bus-type
> > +	When set to 6, Bt.656 decoding (embedded sync) with CRC decoding
> > +	is enabled.
> > +
> 
> I don't think this patch is required at all actually, the binding complies to the
> video-interfaces bus specification which includes the parallel and bt.656.
> 
> Would be worth mentioning below explicitly that parallel and bt.656 are
> supported, or added above that also plain parallel bus is supported ?
> 
> >   ISC supports a single port node with parallel bus. It should contain
> > one
> 
> here inside the previous line
Hi Eugen,

Yes it's true adding new documentation here may be overkill, but yes it should say something
(as a user I always find it helpful if the docs are more verbose than not).

So per your suggestion, how about the simplified:
"ISC supports a single port node with parallel bus and optionally Bt.656 support."

and I'll remit the other statements.

> >   'port' child node with child 'endpoint' node. Please refer to the bindings
> >   defined in Documentation/devicetree/bindings/media/video-
> interfaces.txt.
> >

Thanks,
Ken




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux