According to the binding documentation and the source code the
tegra gpio controller takes IRQ_TYPE_* as its flags values, not
GPIO_ACTIVE_*.
This patch uses the right variable type which yields the same result
when compiled. Note that this might be wrong and actually
IRQ_TYPE_LEVEL_LOW is intended by the dt author.
Signed-off-by: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/tegra114-dalmore.dts | 2 +-
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 2 +-
arch/arm/boot/dts/tegra124-venice2.dts | 2 +-
arch/arm/boot/dts/tegra30-apalis.dtsi | 4 ++--
arch/arm/boot/dts/tegra30-beaver.dts | 2 +-
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 3 ++-
6 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 1444fbd543e7..bc2445bf582d 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -779,7 +779,7 @@
compatible = "realtek,rt5640";
reg = <0x1c>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+ interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_NONE>;
realtek,ldo1-en-gpios =
<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 53994f9fbbcc..8d4f1ca85a61 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1413,7 +1413,7 @@
compatible = "realtek,rt5639";
reg = <0x1c>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+ interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_NONE>;
realtek,ldo1-en-gpios =
<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 6e59cec0962b..c595631b0a0c 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -612,7 +612,7 @@
compatible = "maxim,max98090";
reg = <0x10>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+ interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_NONE>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index f6c7c3e958ac..aaaf73c0412e 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -656,7 +656,7 @@
reg = <1>;
clocks = <&clk16m>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_LOW>;
+ interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_RISING>;
spi-max-frequency = <10000000>;
};
};
@@ -671,7 +671,7 @@
reg = <0>;
clocks = <&clk16m>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_RISING>;
spi-max-frequency = <10000000>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index 0350002849d5..8917589a78e8 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -1761,7 +1761,7 @@
compatible = "realtek,rt5640";
reg = <0x1c>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+ interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_NONE>;
realtek,ldo1-en-gpios =
<&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index a8c0318743b6..07c2888d3e48 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -78,9 +78,10 @@
reg = <0>;
clocks = <&clk16m>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+ interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_RISING>;
spi-max-frequency = <10000000>;
};
+
spidev0: spi@1 {
compatible = "spidev";
reg = <1>;
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
