Hi,
On Friday 06 December 2013 08:05 PM, Roger Quadros wrote:
> Hi Kishon,
>
> On 11/25/2013 12:01 PM, Kishon Vijay Abraham I wrote:
>> Adapted omap-usb3 PHY driver to Generic PHY Framework and moved phy-omap-usb3
>> driver in drivers/usb/phy to drivers/phy and also renamed the file to
>> phy-ti-pipe3 since this same driver will be used for SATA PHY and
>> PCIE PHY.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>> ---
>> drivers/phy/Kconfig | 11 +
>> drivers/phy/Makefile | 1 +
>> .../phy/phy-omap-usb3.c => phy/phy-ti-pipe3.c} | 232 ++++++++++++--------
>> drivers/usb/phy/Kconfig | 11 -
>> drivers/usb/phy/Makefile | 1 -
>> 5 files changed, 149 insertions(+), 107 deletions(-)
>> rename drivers/{usb/phy/phy-omap-usb3.c => phy/phy-ti-pipe3.c} (55%)
>>
>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>> index a344f3d..1abbfcc 100644
>> --- a/drivers/phy/Kconfig
>> +++ b/drivers/phy/Kconfig
>> @@ -33,6 +33,17 @@ config OMAP_USB2
>> The USB OTG controller communicates with the comparator using this
>> driver.
>>
>> +config TI_PIPE3
>> + tristate "TI PIPE3 PHY Driver"
>> + depends on ARCH_OMAP2PLUS || COMPILE_TEST
>> + select GENERIC_PHY
>> + select OMAP_CONTROL_USB
>> + help
>> + Enable this to support the PIPE3 PHY that is part of TI SOCs. This
>> + driver takes care of all the PHY functionality apart from comparator.
>> + This driver interacts with the "OMAP Control PHY Driver" to power
>> + on/off the PHY.
>> +
>> config TWL4030_USB
>> tristate "TWL4030 USB Transceiver Driver"
>> depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
>> index d0caae9..94a1a79 100644
>> --- a/drivers/phy/Makefile
>> +++ b/drivers/phy/Makefile
>> @@ -6,4 +6,5 @@ obj-$(CONFIG_GENERIC_PHY) += phy-core.o
>> obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
>> obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
>> obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
>> +obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
>> obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
>> diff --git a/drivers/usb/phy/phy-omap-usb3.c b/drivers/phy/phy-ti-pipe3.c
>> similarity index 55%
>> rename from drivers/usb/phy/phy-omap-usb3.c
>> rename to drivers/phy/phy-ti-pipe3.c
>> index 0c6ba29..410b286 100644
>> --- a/drivers/usb/phy/phy-omap-usb3.c
>> +++ b/drivers/phy/phy-ti-pipe3.c
>> @@ -1,5 +1,5 @@
>> /*
>> - * omap-usb3 - USB PHY, talking to dwc3 controller in OMAP.
>> + * phy-ti-pipe3 - PIPE3 PHY driver.
>> *
>> * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
>> * This program is free software; you can redistribute it and/or modify
>> @@ -19,10 +19,11 @@
>> #include <linux/module.h>
>> #include <linux/platform_device.h>
>> #include <linux/slab.h>
>> -#include <linux/usb/omap_usb.h>
>> +#include <linux/phy/phy.h>
>> #include <linux/of.h>
>> #include <linux/clk.h>
>> #include <linux/err.h>
>> +#include <linux/io.h>
>> #include <linux/pm_runtime.h>
>> #include <linux/delay.h>
>> #include <linux/usb/omap_control_usb.h>
>> @@ -52,17 +53,34 @@
>>
>> /*
>> * This is an Empirical value that works, need to confirm the actual
>> - * value required for the USB3PHY_PLL_CONFIGURATION2.PLL_IDLE status
>> - * to be correctly reflected in the USB3PHY_PLL_STATUS register.
>> + * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status
>> + * to be correctly reflected in the PIPE3PHY_PLL_STATUS register.
>> */
>> # define PLL_IDLE_TIME 100;
>>
>> -struct usb_dpll_map {
>> +struct pipe3_dpll_params {
>> + u16 m;
>> + u8 n;
>> + u8 freq:3;
>> + u8 sd;
>> + u32 mf;
>> +};
>> +
>> +struct ti_pipe3 {
>> + void __iomem *pll_ctrl_base;
>> + struct device *dev;
>> + struct device *control_dev;
>> + struct clk *wkupclk;
>> + struct clk *sys_clk;
>> + struct clk *optclk;
>> +};
>> +
>> +struct pipe3_dpll_map {
>> unsigned long rate;
>> - struct usb_dpll_params params;
>> + struct pipe3_dpll_params params;
>> };
>>
>> -static struct usb_dpll_map dpll_map[] = {
>> +static struct pipe3_dpll_map dpll_map[] = {
>> {12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */
>> {16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */
>> {19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */
>> @@ -71,7 +89,18 @@ static struct usb_dpll_map dpll_map[] = {
>> {38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */
>> };
>>
>> -static struct usb_dpll_params *omap_usb3_get_dpll_params(unsigned long rate)
>> +static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset)
>> +{
>> + return __raw_readl(addr + offset);
>> +}
>> +
>> +static inline void ti_pipe3_writel(void __iomem *addr, unsigned offset,
>> + u32 data)
>> +{
>> + __raw_writel(data, addr + offset);
>> +}
>> +
>> +static struct pipe3_dpll_params *ti_pipe3_get_dpll_params(unsigned long rate)
>> {
>> int i;
>>
>> @@ -83,110 +112,113 @@ static struct usb_dpll_params *omap_usb3_get_dpll_params(unsigned long rate)
>> return NULL;
>> }
>>
>> -static int omap_usb3_suspend(struct usb_phy *x, int suspend)
>> +static int ti_pipe3_power_off(struct phy *x)
>> {
>> - struct omap_usb *phy = phy_to_omapusb(x);
>> - int val;
>> + struct ti_pipe3 *phy = phy_get_drvdata(x);
>> + int val;
>> int timeout = PLL_IDLE_TIME;
>>
>> - if (suspend && !phy->is_suspended) {
>> - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
>> - val |= PLL_IDLE;
>> - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
>> -
>> - do {
>> - val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS);
>> - if (val & PLL_TICOPWDN)
>> - break;
>> - udelay(1);
>> - } while (--timeout);
>> -
>> - omap_control_usb_phy_power(phy->control_dev, 0);
>> -
>> - phy->is_suspended = 1;
>> - } else if (!suspend && phy->is_suspended) {
>> - phy->is_suspended = 0;
>> -
>> - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
>> - val &= ~PLL_IDLE;
>> - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
>> -
>> - do {
>> - val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS);
>> - if (!(val & PLL_TICOPWDN))
>> - break;
>> - udelay(1);
>> - } while (--timeout);
>> - }
>> + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
>> + val |= PLL_IDLE;
>> + ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
>> +
>> + do {
>> + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
>> + if (val & PLL_TICOPWDN)
>> + break;
>> + usleep_range(1, 5);
>
> I had suggested to use sleep instead of udelay here but usleep for < 10 us might not be not optimal.
> see Documentation/timers/timers-howto.txt
ok.
>
> Why can't we just use msleep(1)?
isn't it too long?
>
> Do we know approximately how much time it takes for the block to power down?
I have to check that. But long time back for OMAP5 it used to vary from board
to board.
>
>> + } while (--timeout);
>> +
>
> what if there was a timeout? you need to exit with return code and preferably print an error message.
hmm.. yeah.
>
>> + omap_control_usb_phy_power(phy->control_dev, 0);
>> +
>> + return 0;
>> +}
>> +
>> +static int ti_pipe3_power_on(struct phy *x)
>> +{
>> + struct ti_pipe3 *phy = phy_get_drvdata(x);
>> + int val;
>> + int timeout = PLL_IDLE_TIME;
>> +
>> + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
>> + val &= ~PLL_IDLE;
>> + ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
>> +
>> + do {
>> + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
>> + if (!(val & PLL_TICOPWDN))
>> + break;
>> + usleep_range(1, 5);
>> + } while (--timeout);
>
> here as well.
ok.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
