pbias register controls internal power supply to sd card i/o pads
in most OMAPs (OMAP2-5, DRA7).
Control bits for selecting voltage level and
enabling/disabling are in the same PBIAS register.
Signed-off-by: Balaji T K <balajitk@xxxxxx>
---
Documentation/devicetree/bindings/regulator/pbias-regulator.txt | 21
drivers/regulator/Kconfig | 9
drivers/regulator/Makefile | 1
drivers/regulator/pbias-regulator.c | 236 ++++++++++
4 files changed, 267 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/pbias-regulator.txt
create mode 100644 drivers/regulator/pbias-regulator.c
Index: lo/Documentation/devicetree/bindings/regulator/pbias-regulator.txt
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ lo/Documentation/devicetree/bindings/regulator/pbias-regulator.txt 2013-12-10 16:58:28.907927745 +0530
@@ -0,0 +1,21 @@
+PBIAS internal regulator for SD card i/o pads on OMAP SoCs.
+
+Required properties:
+- compatible:
+ - "regulator-pbias-omap2" for OMAP2
+ - "regulator-pbias-omap3" for OMAP3
+ - "regulator-pbias-omap4" for OMAP4
+ - "regulator-pbias-omap5" for OMAP5, DRA7
+- pbias-reg-offset: PBIAS control register offset from syscon base address
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+
+ pbias_regulator: pbias_regulator {
+ pbias-reg-offset = <0>;
+ regulator-name = "pbias_regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
Index: lo/drivers/regulator/Kconfig
===================================================================
--- lo.orig/drivers/regulator/Kconfig 2013-12-10 16:58:16.411852457 +0530
+++ lo/drivers/regulator/Kconfig 2013-12-10 17:08:29.291513120 +0530
@@ -369,6 +369,15 @@ config REGULATOR_PALMAS
on the muxing. This is handled automatically in the driver by
reading the mux info from OTP.
+config REGULATOR_PBIAS
+ tristate "PBIAS OMAP regulator driver"
+ depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
+ help
+ Say y here to support pbias regulator for mmc1:SD card i/o
+ on OMAP SoCs.
+ This driver provides support for OMAP pbias modelled
+ regulators.
+
config REGULATOR_PCAP
tristate "Motorola PCAP2 regulator driver"
depends on EZX_PCAP
Index: lo/drivers/regulator/Makefile
===================================================================
--- lo.orig/drivers/regulator/Makefile 2013-12-10 16:58:16.411852457 +0530
+++ lo/drivers/regulator/Makefile 2013-12-10 16:58:28.915927793 +0530
@@ -52,6 +52,7 @@ obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
+obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o
Index: lo/drivers/regulator/pbias-regulator.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ lo/drivers/regulator/pbias-regulator.c 2013-12-10 17:06:51.046930033 +0530
@@ -0,0 +1,236 @@
+/*
+ * pbias-regulator.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Balaji T K <balajitk@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+struct pbias_reg_info {
+ u32 enable;
+ u32 enable_mask;
+ u32 vmode;
+ char *name;
+};
+
+struct pbias_regulator_data {
+ struct regulator_desc desc;
+ void __iomem *pbias_addr;
+ unsigned int pbias_reg;
+ struct regulator_dev *dev;
+ struct regmap *syscon;
+ const struct pbias_reg_info *info;
+ int voltage;
+};
+
+static int pbias_regulator_set_voltage(struct regulator_dev *dev,
+ int min_uV, int max_uV, unsigned *selector)
+{
+ struct pbias_regulator_data *data = rdev_get_drvdata(dev);
+ const struct pbias_reg_info *info = data->info;
+ int ret, vmode;
+
+ if (min_uV <= 1800000)
+ vmode = 0;
+ else if (min_uV > 1800000)
+ vmode = info->vmode;
+
+ ret = regmap_update_bits(data->syscon, data->pbias_reg,
+ info->vmode, vmode);
+
+ return ret;
+}
+
+static int pbias_regulator_get_voltage(struct regulator_dev *rdev)
+{
+ struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+ const struct pbias_reg_info *info = data->info;
+ int value, voltage;
+
+ regmap_read(data->syscon, data->pbias_reg, &value);
+ value &= info->vmode;
+
+ voltage = value ? 1800000 : 3000000;
+
+ return voltage;
+}
+
+static int pbias_regulator_enable(struct regulator_dev *rdev)
+{
+ struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+ const struct pbias_reg_info *info = data->info;
+ int ret;
+
+ ret = regmap_update_bits(data->syscon, data->pbias_reg,
+ info->enable_mask, info->enable);
+
+ return ret;
+}
+
+static int pbias_regulator_disable(struct regulator_dev *rdev)
+{
+ struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+ const struct pbias_reg_info *info = data->info;
+ int ret;
+
+ ret = regmap_update_bits(data->syscon, data->pbias_reg,
+ info->enable_mask, 0);
+ return ret;
+}
+
+static int pbias_regulator_is_enable(struct regulator_dev *rdev)
+{
+ struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+ const struct pbias_reg_info *info = data->info;
+ int value;
+
+ regmap_read(data->syscon, data->pbias_reg, &value);
+
+ return (value & info->enable_mask) == info->enable_mask;
+}
+
+static struct regulator_ops pbias_regulator_voltage_ops = {
+ .set_voltage = pbias_regulator_set_voltage,
+ .get_voltage = pbias_regulator_get_voltage,
+ .enable = pbias_regulator_enable,
+ .disable = pbias_regulator_disable,
+ .is_enabled = pbias_regulator_is_enable,
+};
+
+static const struct pbias_reg_info pbias_omap3 = {
+ .enable = BIT(1),
+ .enable_mask = BIT(1),
+ .vmode = BIT(0),
+ .name = "pbias_omap3"
+};
+
+static const struct pbias_reg_info pbias_omap4 = {
+ .enable = BIT(26) | BIT(22),
+ .enable_mask = BIT(26) | BIT(25) | BIT(22),
+ .vmode = BIT(21),
+ .name = "pbias_omap4"
+};
+
+static const struct pbias_reg_info pbias_omap5 = {
+ .enable = BIT(27) | BIT(26),
+ .enable_mask = BIT(27) | BIT(25) | BIT(26),
+ .vmode = BIT(21),
+ .name = "pbias_omap5"
+};
+
+static const struct of_device_id pbias_of_match[] = {
+ { .compatible = "regulator-pbias-omap3", .data = &pbias_omap3},
+ { .compatible = "regulator-pbias-omap4", .data = &pbias_omap4},
+ { .compatible = "regulator-pbias-omap5", .data = &pbias_omap5},
+ {},
+};
+MODULE_DEVICE_TABLE(of, pbias_of_match);
+
+static int pbias_regulator_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *syscon_np;
+ struct pbias_regulator_data *drvdata;
+ const struct of_device_id *id;
+ struct regulator_init_data *initdata;
+ struct regulator_config cfg = { };
+ int ret;
+
+ drvdata = devm_kzalloc(&pdev->dev, sizeof(struct pbias_regulator_data),
+ GFP_KERNEL);
+ if (drvdata == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate device data\n");
+ return -ENOMEM;
+ }
+
+ id = of_match_device(of_match_ptr(pbias_of_match), &pdev->dev);
+ if (!id)
+ return -ENODEV;
+
+ drvdata->info = id->data;
+ if (!drvdata->info)
+ return -ENODEV;
+
+ initdata = of_get_regulator_init_data(&pdev->dev, np);
+ if (!initdata)
+ return -EINVAL;
+
+ ret = of_property_read_u32(np, "pbias-reg-offset",
+ &drvdata->pbias_reg);
+ if (ret) {
+ dev_err(&pdev->dev, "no pbias-reg-offset property set\n");
+ return ret;
+ }
+
+ syscon_np = of_get_parent(np);
+ if (!syscon_np)
+ return -ENODEV;
+
+ drvdata->syscon = syscon_node_to_regmap(syscon_np);
+ of_node_put(syscon_np);
+ if (IS_ERR(drvdata->syscon))
+ return PTR_ERR(drvdata->syscon);
+
+ drvdata->desc.name = drvdata->info->name;
+ drvdata->desc.owner = THIS_MODULE;
+ drvdata->desc.type = REGULATOR_VOLTAGE;
+ drvdata->desc.ops = &pbias_regulator_voltage_ops;
+ drvdata->desc.n_voltages = 2;
+
+ cfg.dev = &pdev->dev;
+ cfg.init_data = initdata;
+ cfg.driver_data = drvdata;
+ cfg.of_node = np;
+
+ drvdata->dev = devm_regulator_register(&pdev->dev, &drvdata->desc,
+ &cfg);
+ if (IS_ERR(drvdata->dev)) {
+ ret = PTR_ERR(drvdata->dev);
+ dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
+ goto err_regulator;
+ }
+
+ platform_set_drvdata(pdev, drvdata);
+
+err_regulator:
+ return ret;
+}
+
+static struct platform_driver pbias_regulator_driver = {
+ .probe = pbias_regulator_probe,
+ .driver = {
+ .name = "pbias-regulator",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(pbias_of_match),
+ },
+};
+
+module_platform_driver(pbias_regulator_driver);
+
+MODULE_AUTHOR("Balaji T K <balajitk@xxxxxx>");
+MODULE_DESCRIPTION("pbias voltage regulator");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pbias-regulator");
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
