Adapted dwc3 core to use the Generic PHY Framework. So for init, exit,
power_on and power_off the following APIs are used phy_init(), phy_exit(),
phy_power_on() and phy_power_off().
However using the old USB phy library wont be removed till the PHYs of all
other SoC's using dwc3 core is adapted to the Generic PHY Framework.
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
Documentation/devicetree/bindings/usb/dwc3.txt | 6 ++-
drivers/usb/dwc3/Kconfig | 1 +
drivers/usb/dwc3/core.c | 66 +++++++++++++++++++++---
drivers/usb/dwc3/core.h | 7 +++
4 files changed, 70 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index e807635..471366d 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -6,11 +6,13 @@ Required properties:
- compatible: must be "snps,dwc3"
- reg : Address and length of the register set for the device
- interrupts: Interrupts used by the dwc3 controller.
+
+Optional properties:
- usb-phy : array of phandle for the PHY device. The first element
in the array is expected to be a handle to the USB2/HS PHY and
the second element is expected to be a handle to the USB3/SS PHY
-
-Optional properties:
+ - phys: from the *Generic PHY* bindings
+ - phy-names: from the *Generic PHY* bindings
- tx-fifo-resize: determines if the FIFO *has* to be reallocated.
This is usually a subnode to DWC3 glue to which it is connected.
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 8e385b4..64eed6f 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -2,6 +2,7 @@ config USB_DWC3
tristate "DesignWare USB3 DRD Core Support"
depends on (USB || USB_GADGET) && HAS_DMA
select USB_PHY
+ select GENERIC_PHY
select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
help
Say Y or M here if your system has a Dual Role SuperSpeed
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index f20f4a1..628b372 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -85,6 +85,12 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
usb_phy_init(dwc->usb2_phy);
if (!IS_ERR(dwc->usb3_phy))
usb_phy_init(dwc->usb3_phy);
+
+ if (!IS_ERR(dwc->usb2_generic_phy))
+ phy_init(dwc->usb2_generic_phy);
+ if (!IS_ERR(dwc->usb3_generic_phy))
+ phy_init(dwc->usb3_generic_phy);
+
mdelay(100);
/* Clear USB3 PHY reset */
@@ -348,6 +354,12 @@ static void dwc3_core_exit(struct dwc3 *dwc)
usb_phy_shutdown(dwc->usb2_phy);
if (!IS_ERR(dwc->usb3_phy))
usb_phy_shutdown(dwc->usb3_phy);
+
+ if (!IS_ERR(dwc->usb2_generic_phy))
+ phy_power_off(dwc->usb2_generic_phy);
+ if (!IS_ERR(dwc->usb3_generic_phy))
+ phy_power_off(dwc->usb3_generic_phy);
+
}
#define DWC3_ALIGN_MASK (16 - 1)
@@ -417,26 +429,34 @@ static int dwc3_probe(struct platform_device *pdev)
if (dwc_data)
dwc->quirks = dwc_data->quirks;
- if (!(dwc->quirks & DWC3_QUIRK_NO_USB2_PHY))
+ if (!(dwc->quirks & DWC3_QUIRK_NO_USB2_PHY)) {
+ dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev,
"usb-phy", 0);
+ }
- if (!(dwc->quirks & DWC3_QUIRK_NO_USB3_PHY))
+ if (!(dwc->quirks & DWC3_QUIRK_NO_USB3_PHY)) {
+ dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev,
"usb-phy", 1);
+ }
dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize");
dwc->dr_mode = of_usb_get_dr_mode(node);
} else if (pdata) {
dwc->maximum_speed = pdata->maximum_speed;
- if (!(pdata->quirks & DWC3_QUIRK_NO_USB2_PHY))
+ if (!(pdata->quirks & DWC3_QUIRK_NO_USB2_PHY)) {
+ dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
dwc->usb2_phy = devm_usb_get_phy(dev,
USB_PHY_TYPE_USB2);
+ }
- if (!(pdata->quirks & DWC3_QUIRK_NO_USB3_PHY))
+ if (!(pdata->quirks & DWC3_QUIRK_NO_USB3_PHY)) {
+ dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
dwc->usb3_phy = devm_usb_get_phy(dev,
USB_PHY_TYPE_USB3);
+ }
dwc->needs_fifo_resize = pdata->tx_fifo_resize;
dwc->dr_mode = pdata->dr_mode;
@@ -445,14 +465,20 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
}
- if (IS_ERR(dwc->usb2_phy)) {
+ if (IS_ERR(dwc->usb2_phy) && IS_ERR(dwc->usb2_generic_phy)) {
dev_err(dev, "usb2 phy not found\n");
- return PTR_ERR(dwc->usb2_phy);
+ if (PTR_ERR(dwc->usb2_generic_phy) == -EPROBE_DEFER ||
+ PTR_ERR(dwc->usb2_phy) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ return -ENODEV;
}
- if (IS_ERR(dwc->usb3_phy)) {
+ if (IS_ERR(dwc->usb3_phy) && IS_ERR(dwc->usb3_generic_phy)) {
dev_err(dev, "usb3 phy not found\n");
- return PTR_ERR(dwc->usb3_phy);
+ if (PTR_ERR(dwc->usb3_generic_phy) == -EPROBE_DEFER ||
+ PTR_ERR(dwc->usb3_phy) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ return -ENODEV;
}
/* default to superspeed if no maximum_speed passed */
@@ -510,6 +536,11 @@ static int dwc3_probe(struct platform_device *pdev)
if (!IS_ERR(dwc->usb3_phy))
usb_phy_set_suspend(dwc->usb3_phy, 0);
+ if (!IS_ERR(dwc->usb2_generic_phy))
+ phy_power_on(dwc->usb2_generic_phy);
+ if (!IS_ERR(dwc->usb3_generic_phy))
+ phy_power_on(dwc->usb3_generic_phy);
+
ret = dwc3_event_buffers_setup(dwc);
if (ret) {
dev_err(dwc->dev, "failed to setup event buffers\n");
@@ -595,6 +626,10 @@ err1:
usb_phy_set_suspend(dwc->usb2_phy, 1);
if (!IS_ERR(dwc->usb3_phy))
usb_phy_set_suspend(dwc->usb3_phy, 1);
+ if (!IS_ERR(dwc->usb2_generic_phy))
+ phy_power_off(dwc->usb2_generic_phy);
+ if (!IS_ERR(dwc->usb3_generic_phy))
+ phy_power_off(dwc->usb3_generic_phy);
dwc3_core_exit(dwc);
err0:
@@ -612,6 +647,11 @@ static int dwc3_remove(struct platform_device *pdev)
if (!IS_ERR(dwc->usb3_phy))
usb_phy_set_suspend(dwc->usb3_phy, 1);
+ if (!IS_ERR(dwc->usb2_generic_phy))
+ phy_power_off(dwc->usb2_generic_phy);
+ if (!IS_ERR(dwc->usb3_generic_phy))
+ phy_power_off(dwc->usb3_generic_phy);
+
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
@@ -711,6 +751,11 @@ static int dwc3_suspend(struct device *dev)
if (!IS_ERR(dwc->usb2_phy))
usb_phy_shutdown(dwc->usb2_phy);
+ if (!IS_ERR(dwc->usb2_generic_phy))
+ phy_exit(dwc->usb2_generic_phy);
+ if (!IS_ERR(dwc->usb3_generic_phy))
+ phy_exit(dwc->usb3_generic_phy);
+
return 0;
}
@@ -724,6 +769,11 @@ static int dwc3_resume(struct device *dev)
if (!IS_ERR(dwc->usb2_phy))
usb_phy_init(dwc->usb2_phy);
+ if (!IS_ERR(dwc->usb2_generic_phy))
+ phy_init(dwc->usb2_generic_phy);
+ if (!IS_ERR(dwc->usb3_generic_phy))
+ phy_init(dwc->usb3_generic_phy);
+
spin_lock_irqsave(&dwc->lock, flags);
dwc3_writel(dwc->regs, DWC3_GCTL, dwc->gctl);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 1e11dd1..dd284ab 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -31,6 +31,8 @@
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
+#include <linux/phy/phy.h>
+
/* Global constants */
#define DWC3_EP0_BOUNCE_SIZE 512
#define DWC3_ENDPOINTS_NUM 32
@@ -617,6 +619,8 @@ struct dwc3_scratchpad_array {
* @dr_mode: requested mode of operation
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
+ * @usb2_generic_phy: pointer to USB2 PHY
+ * @usb3_generic_phy: pointer to USB3 PHY
* @dcfg: saved contents of DCFG register
* @gctl: saved contents of GCTL register
* @is_selfpowered: true when we are selfpowered
@@ -670,6 +674,9 @@ struct dwc3 {
struct usb_phy *usb2_phy;
struct usb_phy *usb3_phy;
+ struct phy *usb2_generic_phy;
+ struct phy *usb3_generic_phy;
+
void __iomem *regs;
size_t regs_size;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
