Modified dwc3 core to find PHYs only if the platform indicates that it has
to use a PHY (using quirks). Adapted DWC3 and USB3 PHY to use Generic PHY
framework. Also changed the name of USB3 PHY driver to PIPE3 PHY driver
since the same driver has to be used for SATA and PCIE too.
Changes from v2:
* added a couple of fixes. One is invoking phy_resume after phy_init and the
other is power off phy in error patch
* used quirks to identify if a particular platform does not have PHYs
* removed using separate header for pipe3 driver and also removed all referencs
to SATA and PCIe in pipe3 driver since it's not yet adapted for those drivers.
Changes from v1:
* The logic in which the driver detects the presence of PHYs has changed.
* patch ordering has changed
* udelay is replaced with usleep_range
* A patch to remove set_suspend callback which was deferred from Generic
PHY Framework series has been included.
Kishon Vijay Abraham I (10):
usb: dwc3: invoke phy_resume after phy_init
usb: dwc3: power off usb phy in error path
usb: dwc3: preparation for adapting dwc3 to generic phy framework
usb: dwc3: use quirks to know if a particualr platform doesn't have
PHY
usb: dwc3: adapt dwc3 core to use Generic PHY Framework
Documentation: dt bindings: move ..usb/usb-phy.txt to
..phy/ti-phy.txt
drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework
usb: phy: omap-usb2: remove *set_suspend* callback from omap-usb2
phy: omap-usb2: move omap_usb.h from linux/usb/ to linux/phy/
arm/dts: added dt properties to adapt to the new phy framwork
.../bindings/{usb/usb-phy.txt => phy/ti-phy.txt} | 8 +-
Documentation/devicetree/bindings/usb/dwc3.txt | 6 +-
arch/arm/boot/dts/omap5.dtsi | 4 +
drivers/phy/Kconfig | 11 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-omap-usb2.c | 27 +--
.../phy/phy-omap-usb3.c => phy/phy-ti-pipe3.c} | 232 ++++++++++++--------
drivers/usb/dwc3/Kconfig | 2 +
drivers/usb/dwc3/core.c | 189 +++++++++++-----
drivers/usb/dwc3/core.h | 22 ++
drivers/usb/dwc3/platform_data.h | 5 +
drivers/usb/phy/Kconfig | 11 -
drivers/usb/phy/Makefile | 1 -
include/linux/{usb => phy}/omap_usb.h | 3 -
14 files changed, 320 insertions(+), 202 deletions(-)
rename Documentation/devicetree/bindings/{usb/usb-phy.txt => phy/ti-phy.txt} (88%)
rename drivers/{usb/phy/phy-omap-usb3.c => phy/phy-ti-pipe3.c} (55%)
rename include/linux/{usb => phy}/omap_usb.h (95%)
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
