On Wed, Sep 7, 2016 at 1:06 PM, Kevin Hilman <khilman@xxxxxxxxxxxx> wrote: > Hi Marrtin, > > Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> writes: > >> This adds support for the internal eMMC, the SD-card slot and ethernet on >> all Tronsmart S95 Vega boards. >> There are some S95 Vega Meta clones out there where the bootloader does >> not configure the ethernet registers correctly, leading to non-working >> ethernet. This will be fixed in a separate series. Boards which are not >> suffering from broken bootloaders have fully working ethernet. >> >> Changes since v1: >> - rebased after latest updates which added the IR decoder to >> meson-gxbb-vega-s95.dtsi >> >> Changes since the RFC: >> - added eMMC support >> - renamed fixed 3V3 regulator so it can be re-used for eMMC >> >> >> Martin Blumenstingl (3): >> ARM64: dts: amlogic: SD card support for all Tronsmart Vega S95 >> devices >> ARM64: dts: amlogic: eMMC support for all Tronsmart Vega S95 devices >> ARM64: dts: amlogic: enable ethernet on all Tronsmart Vega S95 devices > > I've applied the ethernet one, but I'm going to wait on the SD/eMMC > patches until the driver is finalized for the other one. Oops, I replied on the wrong thread, but just to be clear, I applied v2 of the ethernet patch, though it doesn't make too much difference in this case. Kevin -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
