Hi Marrtin, Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> writes: > This adds support for the internal eMMC, the SD-card slot and ethernet on > all Tronsmart S95 Vega boards. > There are some S95 Vega Meta clones out there where the bootloader does > not configure the ethernet registers correctly, leading to non-working > ethernet. This will be fixed in a separate series. Boards which are not > suffering from broken bootloaders have fully working ethernet. > > Changes since v1: > - rebased after latest updates which added the IR decoder to > meson-gxbb-vega-s95.dtsi > > Changes since the RFC: > - added eMMC support > - renamed fixed 3V3 regulator so it can be re-used for eMMC > > > Martin Blumenstingl (3): > ARM64: dts: amlogic: SD card support for all Tronsmart Vega S95 > devices > ARM64: dts: amlogic: eMMC support for all Tronsmart Vega S95 devices > ARM64: dts: amlogic: enable ethernet on all Tronsmart Vega S95 devices I've applied the ethernet one, but I'm going to wait on the SD/eMMC patches until the driver is finalized for the other one. Thanks, Kevin -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
