This adds support for the internal eMMC, the SD-card slot and ethernet on
all Tronsmart S95 Vega boards.
There are some S95 Vega Meta clones out there where the bootloader does
not configure the ethernet registers correctly, leading to non-working
ethernet. This will be fixed in a separate series. Boards which are not
suffering from broken bootloaders have fully working ethernet.
Changes since the RFC:
- added eMMC support
- renamed fixed 3V3 regulator so it can be re-used for eMMC
Martin Blumenstingl (3):
ARM64: dts: amlogic: SD card support for all Tronsmart Vega S95
devices
ARM64: dts: amlogic: eMMC support for all Tronsmart Vega S95 devices
ARM64: dts: amlogic: enable ethernet on all Tronsmart Vega S95 devices
.../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 67 ++++++++++++++++++++++
1 file changed, 67 insertions(+)
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
