Hi all, The first patch adds a call to qcom SCM driver which helps to change the Venus core state, in practice it is used for supend and resume the video core. Second patch add two SCM calls needed by Venus remoteproc driver in order to load and authenticate the firmware. Next two patches add dt binding document and the Venus remoteproc driver itself. Comments are welcome. regards, Stan Stanimir Varbanov (4): firmware: qcom: scm: add a video command for state setting firmware: qcom: scm: add iommu scm calls for pg table dt-binding: remoteproc: venus rproc dt binding document remoteproc: qcom: add Venus video core firmware loader driver .../devicetree/bindings/remoteproc/qcom,venus.txt | 33 +++ drivers/firmware/qcom_scm-32.c | 18 ++ drivers/firmware/qcom_scm-64.c | 58 ++++++ drivers/firmware/qcom_scm.c | 28 +++ drivers/firmware/qcom_scm.h | 13 ++ drivers/remoteproc/Kconfig | 10 + drivers/remoteproc/Makefile | 1 + drivers/remoteproc/qcom_venus_pil.c | 226 +++++++++++++++++++++ include/linux/qcom_scm.h | 5 + 9 files changed, 392 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,venus.txt create mode 100644 drivers/remoteproc/qcom_venus_pil.c -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
