Hi Jose, On Mon, 2016-04-11 at 11:41 +-0100, Jose Abreu wrote: +AD4- The ARC SDP I2S clock can be programmed using a +AD4- specific PLL. +AD4- +AD4- This patch has the goal of adding a clock driver +AD4- that programs this PLL. +AD4- +AD4- At this moment the rate values are hardcoded in +AD4- a table but in the future it would be ideal to +AD4- use a function which determines the PLL values +AD4- given the desired rate. +AD4- +AD4- Signed-off-by: Jose Abreu +ADw-joabreu+AEA-synopsys.com+AD4- +AD4- --- +AD4- +AD4- Changes v3 -+AD4- v4: +AD4- +ACo- Added binding document (as suggested by Stephen Boyd) +AD4- +ACo- Minor code style fixes (as suggested by Stephen Boyd) +AD4- +ACo- Use ioremap (as suggested by Stephen Boyd) +AD4- +ACo- Implement round+AF8-rate (as suggested by Stephen Boyd) +AD4- +ACo- Change to platform driver (as suggested by Stephen Boyd) +AD4- +ACo- Use +AHs-readl/writel+AH0AXw-relaxed (as suggested by Vineet Gupta) +AD4- +AD4- Changes v2 -+AD4- v3: +AD4- +ACo- Implemented recalc+AF8-rate +AD4- +AD4- Changes v1 -+AD4- v2: +AD4- +ACo- Renamed folder to axs10x (as suggested by Alexey Brodkin) +AD4- +ACo- Added more supported rates +AFs-snip+AF0- +AD4- diff --git a/Documentation/devicetree/bindings/clock/i2s-pll-clock.txt b/Documentation/devicetree/bindings/clock/i2s- +AD4- pll-clock.txt +AD4- new file mode 100644 +AD4- index 0000000..ff86a41 +AD4- --- /dev/null +AD4- +-+-+- b/Documentation/devicetree/bindings/clock/i2s-pll-clock.txt +AD4- +AEAAQA- -0,0 +-1,17 +AEAAQA- +AD4- +-Binding for the AXS10X I2S PLL clock +AD4- +- +AD4- +-This binding uses the common clock binding+AFs-1+AF0-. +AD4- +- +AD4- +-+AFs-1+AF0- Documentation/devicetree/bindings/clock/clock-bindings.txt +AD4- +- +AD4- +-Required properties: +AD4- +-- compatible: shall be +ACI-snps,i2s-pll-clock+ACI- +AD4- +-- +ACM-clock-cells: from common clock binding+ADs- Should always be set to 0. +AD4- +-- reg : Address and length of the I2S PLL register set. +AD4- +- +AD4- +-Example: +AD4- +- clock+AEA-0x100a0 +AHs- Please remove +ACI-0x+ACI- from node name. +AD4- +- compatible +AD0- +ACI-snps,i2s-pll-clock+ACIAOw- +AD4- +- reg +AD0- +ADw-0x100a0 0x10+AD4AOw- +AD4- +- +ACM-clock-cells +AD0- +ADw-0+AD4AOw- +AD4- +- +AH0AOw- +AD4- diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile +AD4- index 46869d6..2ca62dc6 100644 +AD4- --- a/drivers/clk/Makefile +AD4- +-+-+- b/drivers/clk/Makefile +AD4- +AEAAQA- -84,3 +-84,4 +AEAAQA- obj-+ACQ-(CONFIG+AF8-X86) +-+AD0- x86/ +AD4- +AKA-obj-+ACQ-(CONFIG+AF8-ARCH+AF8-ZX) +-+AD0- zte/ +AD4- +AKA-obj-+ACQ-(CONFIG+AF8-ARCH+AF8-ZYNQ) +-+AD0- zynq/ +AD4- +AKA-obj-+ACQ-(CONFIG+AF8-H8300) +-+AD0- h8300/ +AD4- +-obj-+ACQ-(CONFIG+AF8-ARC+AF8-PLAT+AF8-AXS10X) +-+AD0- axs10x/ +AD4- diff --git a/drivers/clk/axs10x/Makefile b/drivers/clk/axs10x/Makefile +AD4- new file mode 100644 +AD4- index 0000000..01996b8 +AD4- --- /dev/null +AD4- +-+-+- b/drivers/clk/axs10x/Makefile +AD4- +AEAAQA- -0,0 +-1 +AEAAQA- +AD4- +-obj-y +-+AD0- i2s+AF8-pll+AF8-clock.o +AD4- diff --git a/drivers/clk/axs10x/i2s+AF8-pll+AF8-clock.c b/drivers/clk/axs10x/i2s+AF8-pll+AF8-clock.c +AD4- new file mode 100644 +AD4- index 0000000..3ba4e2f +AD4- --- /dev/null +AD4- +-+-+- b/drivers/clk/axs10x/i2s+AF8-pll+AF8-clock.c +AD4- +AEAAQA- -0,0 +-1,217 +AEAAQA- +AD4- +-/+ACo- +AD4- +- +ACo- Synopsys AXS10X SDP I2S PLL clock driver +AD4- +- +ACo- +AD4- +- +ACo- Copyright (C) 2016 Synopsys +AD4- +- +ACo- +AD4- +- +ACo- This file is licensed under the terms of the GNU General Public +AD4- +- +ACo- License version 2. This program is licensed +ACI-as is+ACI- without any +AD4- +- +ACo- warranty of any kind, whether express or implied. +AD4- +- +ACo-/ +AD4- +- +AD4- +-+ACM-include +ADw-linux/platform+AF8-device.h+AD4- +AD4- +-+ACM-include +ADw-linux/module.h+AD4- +AD4- +-+ACM-include +ADw-linux/clk-provider.h+AD4- +AD4- +-+ACM-include +ADw-linux/err.h+AD4- +AD4- +-+ACM-include +ADw-linux/device.h+AD4- +ACI-linux/platform+AF8-device.h+ACI- includes +ACI-linux/device.h+ACI- so you may make this list of headers a little bit shorter. +AD4- +-+ACM-include +ADw-linux/of+AF8-address.h+AD4- +AD4- +-+ACM-include +ADw-linux/slab.h+AD4- +AD4- +-+ACM-include +ADw-linux/of.h+AD4- +ACI-linux/of+AF8-address.h+ACI- already includes +ACI-linux/of.h+ACI-. +AFs-snip+AF0- +AD4- +- +AD4- +-static const struct of+AF8-device+AF8-id i2s+AF8-pll+AF8-clk+AF8-id+AFsAXQ- +AD0- +AHs- +AD4- +- +AHs- .compatible +AD0- +ACI-snps,i2s-pll-clock+ACI-, +AH0-, I would think that it makes sense to add the board name in this compatible string. So something like+AKAAIg-snps,axs10x-i2s-pll-clock+ACI- IMHO looks much more informative. Also adding Rob Herring and DT mailing list in Cc. Please make sure Rod acks your bindings and corresponding docs. -Alexey-- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
