I'm using gentoo with suspend2-sources kernel v. 2.6.20, compiled loop-AES v3.2a, dietlibc 0.30, util-linux 2.12r.
When booting from USB flashdrive, kernel boots ok until this:
RAMDISK: Compressed image found at block 0
Replacing swsusp.
No storage allocator is currently active. Rechecking weather we can use one.
Compression Driver: Argh! Nothing follows me in the pipeline!
Compressor didn't initialise okay.
Suspend2: Initialise modules failed!
VFS: Mounted root (minix filesystem) readonly.
Mounting /dev/sdc as /lib failed
md: stopping all md devices.
.
.
System halted.
.
.
(follow some suspend2 related messages)
Note that equal output comes if there is no encrypted root (I switch my sata drives sata1,sata2 <-> sda, sdb). No password is asked.
--configurations--
syslinux.cfg:
default linux
timeout 0
prompt 0
label linux
kernel vmlinuz
append initrd=initrd.gz root=100 init=/linuxrc rootfstype=minix
build-initrd.sh :
USEDEVFS=0
USEPIVOT=1
BOOTDEV=/dev/sdc
BOOTTYPE=vfat
CRYPTROOT=/dev/sda1
ROOTTYPE=reiserfs
CIPHERTYPE=AES128
LOINIT="-I 0"
USEGPGKEY=1
GPGKEYFILE=keyfile
EXTERNALGPGFILES=0
EXTERNALGPGDEV=/dev/fd0
EXTERNALGPGTYPE=ext2
USEMODULE=1
INITRDONLY=0
SOURCEROOT=
DESTINATIONROOT=
DESTINATIONPREFIX=/boot
INITRDGZNAME=initrd.gz
ROOTLOOPINDEX=5
TEMPLOOPINDEX=7
LOOPMODPARAMS=""
UTF8KEYBMODE=0
LOADNATIONALKEYB=0
INITIALDELAY=0
MOUNTDELAY=0
TOOLSPROMPT=0
USEROOTSETUP=0
USEDIETLIBC=1
initrd.conf:
BOOTDEV=/dev/sdc # partitionless USB-stick device
BOOTTYPE=vfat
CRYPTROOT=/dev/sda1
ROOTTYPE=reiserfs
CIPHERTYPE=AES128
LOADNATIONALKEYB=0
INITIALDELAY=0
/etc/fstab:
/dev/sda2 none swap sw,loop=/dev/loop6, encryption=AES128 0 0
/dev/loop5 / reiserfs defaults 0 1
none /proc proc defaults 0 0
none /dev/shm tmpfs defaults 0 0
USB flashdisk directory:
modules-2.6.20-suspend2-r6 ---> loop.ko
aespipe
gpg
initrd.conf
initrd.gz
insmod
ld-linux.so.2
ldlinux.sys
libc.so.6
libz.so.1
keyfile
losetup
syslinux.cfg
System.map-2.6.20-suspend2-r6
vmlinuz
kernel configuration is in attachment.
I would really appreciate some help!
Attachment:
config-suspend2.bz2
Description: BZip2 compressed data
