Re: Question about ceph-balancer and OSD reweights

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/26/20 3:40 AM, shubjero wrote:
I'm running a Ceph Mimic cluster 13.2.6 and we use the ceph-balancer
in upmap mode. This cluster is fairly old and pre-Mimic we used to set
osd reweights to balance the standard deviation of the cluster. Since
moving to Mimic about 9 months ago I enabled the ceph-balancer with
upmap mode and let it do its thing but I did not think about setting
the previously modified reweights back to 1.00000 (not sure if this is
fine or would have been a best practice?)

Does the ceph-balancer in upmap mode manage the osd reweight
dynamically? Just wondering if I need to proactively go back and set
all non 1.00000 reweights to 1.00000.

Balancer in upmap mode should always work on not reweighed (e.g. 1.0000) OSD's.



k
_______________________________________________
ceph-users mailing list -- ceph-users@xxxxxxx
To unsubscribe send an email to ceph-users-leave@xxxxxxx



[Index of Archives]     [Information on CEPH]     [Linux Filesystem Development]     [Ceph Development]     [Ceph Large]     [Ceph Dev]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [xfs]


  Powered by Linux