Right, but should I be proactively returning any reweighted OSD's that are not 1.0000 to 1.0000? On Wed, Feb 26, 2020 at 3:36 AM Konstantin Shalygin <k0ste@xxxxxxxx> wrote: > > On 2/26/20 3:40 AM, shubjero wrote: > > I'm running a Ceph Mimic cluster 13.2.6 and we use the ceph-balancer > > in upmap mode. This cluster is fairly old and pre-Mimic we used to set > > osd reweights to balance the standard deviation of the cluster. Since > > moving to Mimic about 9 months ago I enabled the ceph-balancer with > > upmap mode and let it do its thing but I did not think about setting > > the previously modified reweights back to 1.00000 (not sure if this is > > fine or would have been a best practice?) > > > > Does the ceph-balancer in upmap mode manage the osd reweight > > dynamically? Just wondering if I need to proactively go back and set > > all non 1.00000 reweights to 1.00000. > > Balancer in upmap mode should always work on not reweighed (e.g. 1.0000) > OSD's. > > > > k > _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |