Thanks for the clarification, John. Kind regards, Gökhan On 07/03/2018 10:52 AM, John Spray wrote: > On Tue, Jul 3, 2018 at 9:37 AM Gökhan Kocak > <goekhan.kocak@xxxxxxxxxxxxxxxx> wrote: >> >> Hello everyone, >> >> I tried to enable the Prometheus module (and later with the same result >> the Dashboard module) as outlined in the docs here: >> http://docs.ceph.com/docs/mimic/mgr/dashboard/#enabling >> [mon] >> mgr initial modules = prometheus >> >> However, when I restart the mgr service the module(s) are not loaded. I >> checked this via "ceph mgr module ls". > > The mgr_initial_modules setting is only applied the first time your > cluster starts (it's useful if you're pushing out a static > configuration from another tool). Subsequently you must use "ceph mgr > module enable". > > The dashboard docs probably shouldn't be mentioning this setting, as > it applies to all modules, but is only useful in the specific case of > rolling out a configuration before the cluster has started for the > first time: https://github.com/ceph/ceph/pull/22808 > > BTW, you're looking at the 13.x documentation, the 12.x documentation > is at http://docs.ceph.com/docs/luminous/ > > John > >> Anybody experience the same? >> >> Ceph version 12.2.5 >> >> Kind regards, >> >> Gökhan >> >> _______________________________________________ >> ceph-users mailing list >> ceph-users@xxxxxxxxxxxxxx >> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |