try, zpool replace export1 sdb sdl
but it says the spare is already in use, so I'm not sure why the resilver
isn't already in progress. you might have to remove sdl from the spares
list before you can use it in a replace.
On Fri, Jun 14, 2019 at 9:03 AM mark <m.roth@xxxxxxxxx> wrote:
> Hi, folks,
>
> testing zfs. I'd created a zpoolz2, ran a large backup onto it. Then I
> pulled one drive (11-drive, one hot spare pool), and it resilvered with
> the hot spare. zpool status -x shows me
> state: DEGRADED
> status: One or more devices could not be used because the label is missing
> or
> invalid. Sufficient replicas exist for the pool to continue
> functioning in a degraded state.
> action: Replace the device using 'zpool replace'.
> see: http://zfsonlinux.org/msg/ZFS-8000-4J
> scan: resilvered 1.91T in 29h33m with 0 errors on Tue Jun 11 15:45:59
> 2019
> config:
>
> NAME STATE READ WRITE CKSUM
> export1 DEGRADED 0 0 0
> raidz2-0 DEGRADED 0 0 0
> sda ONLINE 0 0 0
> spare-1 DEGRADED 0 0 0
> sdb UNAVAIL 0 0 0
> sdl ONLINE 0 0 0
> sdc ONLINE 0 0 0
> sdd ONLINE 0 0 0
> sde ONLINE 0 0 0
> sdf ONLINE 0 0 0
> sdg ONLINE 0 0 0
> sdh ONLINE 0 0 0
> sdi ONLINE 0 0 0
> sdj ONLINE 0 0 0
> sdk ONLINE 0 0 0
> spares
> sdl INUSE currently in use
>
> but when I try zpool replace export1 /dev/sdb1, it says, nope,
> invalid vdev specification
> use '-f' to override the following errors:
> /dev/sdb1 is part of active pool 'export1'
>
> Any idea what I'm doing wrong?
>
> mark
>
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> https://lists.centos.org/mailman/listinfo/centos
>
--
-john r pierce
recycling used bits in santa cruz
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
