Hi, folks,
testing zfs. I'd created a zpoolz2, ran a large backup onto it. Then I
pulled one drive (11-drive, one hot spare pool), and it resilvered with
the hot spare. zpool status -x shows me
state: DEGRADED
status: One or more devices could not be used because the label is missing or
invalid. Sufficient replicas exist for the pool to continue
functioning in a degraded state.
action: Replace the device using 'zpool replace'.
see: http://zfsonlinux.org/msg/ZFS-8000-4J
scan: resilvered 1.91T in 29h33m with 0 errors on Tue Jun 11 15:45:59 2019
config:
NAME STATE READ WRITE CKSUM
export1 DEGRADED 0 0 0
raidz2-0 DEGRADED 0 0 0
sda ONLINE 0 0 0
spare-1 DEGRADED 0 0 0
sdb UNAVAIL 0 0 0
sdl ONLINE 0 0 0
sdc ONLINE 0 0 0
sdd ONLINE 0 0 0
sde ONLINE 0 0 0
sdf ONLINE 0 0 0
sdg ONLINE 0 0 0
sdh ONLINE 0 0 0
sdi ONLINE 0 0 0
sdj ONLINE 0 0 0
sdk ONLINE 0 0 0
spares
sdl INUSE currently in use
but when I try zpool replace export1 /dev/sdb1, it says, nope,
invalid vdev specification
use '-f' to override the following errors:
/dev/sdb1 is part of active pool 'export1'
Any idea what I'm doing wrong?
mark
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
