Martin Cerveny wrote:
Hi. I've a problem with onboard pdc20265 (my board is A7V133 from Asus) trying to boot from array. When using RedHat 7.2 original kernel source (2.4.7-10) it boots up fine - ataraid is version 0.02. When using any newer kernel (ataraid 0.03beta), even redhat one, it fails. I've tried 2.4.10, 2.4.17 and 2.4.18 and some others. 2.5 does not compile for me. I'm not sure its ataraid code problem, because overwriting ataraid and pdcraid with older ones does not help. Any suggestions?
Here is a snip from booting:
_______________________________________________ Ataraid-list@xxxxxxxxxx https://listman.redhat.com/mailman/listinfo/ataraid-list
Hello,
I have the same motherboard and it's working. I have debian, but it shouldn't count. So there's some solution, I'm sure. (anyway I'm quite new to linux, so I can't really help. But there's no miracle, for me installation went quite easy, if you want, I can give you a working bootable disk image (root mounted from /dev/ataraid/d0p2 , swap:p1). That might help, I don't know.
Good luck!
radafuk
