# Destroy all data in hd!!!!! Clean first blocs in hd:s and # dd if=/dev/zero of=/dev/hde count=10 try make partition with windows fdisk...:( Do more partitons with linux fdisk... Promise have boot problems with linux fdisk partition table... On Tue, 2 Apr 2002, radafuk wrote: > > > Martin Cerveny wrote: > > Hi. I've a problem with onboard pdc20265 (my board is A7V133 from Asus) > > trying to boot from array. When using RedHat 7.2 original kernel source > > (2.4.7-10) it boots up fine - ataraid is version 0.02. When using any > > newer kernel (ataraid 0.03beta), even redhat one, it fails. I've tried > > 2.4.10, 2.4.17 and 2.4.18 and some others. 2.5 does not compile for me. > > I'm not sure its ataraid code problem, because overwriting ataraid and > > pdcraid with older ones does not help. Any suggestions? > > > > Here is a snip from booting: > > > > > > _______________________________________________ > > > > Ataraid-list@xxxxxxxxxx > > https://listman.redhat.com/mailman/listinfo/ataraid-list > > > > > > Hello, > > I have the same motherboard and it's working. I have debian, but it > shouldn't count. So there's some solution, I'm sure. (anyway I'm quite > new to linux, so I can't really help. But there's no miracle, for me > installation went quite easy, if you want, I can give you a working > bootable disk image (root mounted from /dev/ataraid/d0p2 , swap:p1). > That might help, I don't know. > > Good luck! > > radafuk > > > > _______________________________________________ > > Ataraid-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/ataraid-list > -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-* **** Eerin Rosenström **** ** Servinmaijantie 12 F 77 ** ** 02150 Espoo ** ** p. +358 9 4682997 ** **** p.+358 40 5205030 **** -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
