Re: pdc20265 do not boot?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Are you using initrd while booting with 2.4.7-10 ? Are you using a newer
initrd while booting with 2.4.18 ? If not, you should have appropriate
features compiled into the kernel. Can you boot if set to mirror?
Good luck

Murty 

On Mon, 1 Apr 2002, Martin Cerveny wrote:

> Hi. I've a problem with onboard pdc20265 (my board is A7V133 from Asus) 
> trying to boot from array. When using RedHat 7.2 original kernel source 
> (2.4.7-10) it boots up fine - ataraid is version 0.02. When using any newer 
> kernel (ataraid 0.03beta), even redhat one, it fails. I've tried 2.4.10, 
> 2.4.17 and 2.4.18 and some others. 2.5 does not compile for me. I'm not 
> sure its ataraid code problem, because overwriting ataraid and pdcraid with 
> older ones does not help. Any suggestions?
> 
> Here is a snip from booting:
> 
> PDC20265: IDE controller on PCI bus 00 dev 88
> PCI: Found IRQ 10 for device 00:11.0
> PDC20265: chipset revision 2
> ide: found promise 20265 in RAID mode.
> PDC20265: not 100% native mode: will probe irqs later
> PDC20265: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode.
>      ide2: BM-DMA at 0x8400-0x8407, BIOS settings: hde:pio, hdf:pio
>      ide3: BM-DMA at 0x8408-0x840f, BIOS settings: hdg:pio, hdh:pio
> hde: IC35L020AVER07-0, ATA DISK drive
> hdg: IC35L020AVER07-0, ATA DISK drive
> ide2 at 0x9800-0x9807,0x9402 on irq 10
> ide3 at 0x9000-0x9007,0x8802 on irq 10
> blk: queue c02a245c, I/O limit 4095Mb (mask 0xffffffff)
> hde: 40188960 sectors (20577MB) w/1916KiB Cache, CHS=39870/16/63, UDMA(100)
> blk: queue c02a27a8, I/O limit 4095Mb (mask 0xffffffff)
> hde: 40188960 sectors (20577MB) w/1916KiB Cache, CHS=39870/16/63, UDMA(100)
> Partition check:
>   hde: [PTBL] [2501/255/63] hde1 hde2 hde3
>   hdg: unknown partition table
>   ataraid/d0: ataraid/d0p1 ataraid/d0p2 ataraid/d0p3
> Drive 0 is 19623Mb (33 / 0)
> Drive 1 is 19623Mb (34 / 0)
> Raid0 array consists of 2 drives.
> Promise Fasttrak(tm) Softwareraid driver for linux version 0.03beta
> VFS: Cannot open root device "ataraid/d0p3" or 00:0a
> Please append a correct "root=" boot option
> Kernel panic: VFS: Unable to mount root fs on 00:0a
> 
> 
> 
> _______________________________________________
> 
> Ataraid-list@xxxxxxxxxx
> https://listman.redhat.com/mailman/listinfo/ataraid-list
> 





[Index of Archives]     [Linux RAID]     [Linux Device Mapper]     [Linux IDE]     [Linux SCSI]     [Kernel]     [Linux Books]     [Linux Admin]     [GFS]     [RPM]     [Yosemite Campgrounds]     [AMD 64]

  Powered by Linux