Re: RAID 0 reports errors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 14, 2001 at 02:30:25PM +0100, Sylvain Bertrand wrote:
> Well, I'm using a third drive where redhat7.2 with 2.4.16 is installed to
> build a linux-of-my-own on the RAID 0 array(with the first partition as
> windows XP). Well... when booting on this "spare" drive, I noticed exactly
> the same thing than you: the first drive of the array (hde in my case) has
> some troubles that slows down the system in a terribly manner. You can
> verify it after somewhere in the /proc filesystem, you have a pdc20xxx
> file(probably a HTPxxx in your case) that releaved what you said, the first
> drive is not "optimised"(DMA is disabled for instance) but the second drive
> is ok.

I wonder. Does anyone have an extended partition table which is located in
the "second half" of the logical raid ?





[Index of Archives]     [Linux RAID]     [Linux Device Mapper]     [Linux IDE]     [Linux SCSI]     [Kernel]     [Linux Books]     [Linux Admin]     [GFS]     [RPM]     [Yosemite Campgrounds]     [AMD 64]

  Powered by Linux