On 2013-08-13 16:09, Akib Sayyed wrote: > here is diagram of network > > http://postimg.org/image/o23pd6csn/ [4] This is something completely different than your setup and is more like the one in the other thread here on the list - see "linkset and CIC configuration" [1] This topology needs 4 signaling channels while you have just 1 and 1 spare from the same span. For what you have described before, your config should be OK, but not for the topology from the diagram ... i am confused which one is it [1] http://lists.digium.com/pipermail/asterisk-ss7/2013-August/005182.html > > On Tue, Aug 13, 2013 at 6:38 PM, Akib Sayyed <akibsayyed at gmail.com> > wrote: > > On Tue, Aug 13, 2013 at 6:23 PM, Kaloyan Kovachev <kkovachev at varna.net> > wrote: > > On 2013-08-13 15:23, Akib Sayyed wrote: > Here is my config > > ; [span_1] > ;signalling=pri_cpe > ;switchtype=euroisdn > ;pridialplan=national > ;prilocaldialplan=national > ;group=0 > ;context=from-digital > ;channel=1-15,17-31 > context=from-pstn > group=0 > echocancel=no > signalling=ss7 ;this is ss7 signalling > ss7type=itu ;using the ITU variant > ss7_called_nai=dynamic ;NAI for outgoing calls > ss7_calling_nai=dynamic ;NAI for incoming calls > ss7_internationalprefix=00 ;internation prefixvalue for incoming calls > ss7_nationalprefix=0 ;national prefix value for incoming calls > ss7_subscriberprefix= ;subscriber prefixvalue for incoming calls > ss7_unknownprefix= ;unknown prefix value for incoming calls > ss7_explictacm=yes ;ACM is send as soon as call enters the > dialplan...may not accepted yet though > linkset=1 ;arbitary name forthis set of channels > pointcode=6710 ;the point code forthis system...aka SPC > adjpointcode=s-8193 ;the point code forthe system that we are > > adjpointcode is wrong, maybe you mean 8193 without 's-' > > we are told to keep 's-'? > > signalling to... aka APC > defaultdpc=161 ;the point code forthe system that the CICs will be > negoiated with...aka DPC > networkindicator=national_spare ;NI value for MTP3 > ;cicbeginswith=158 ;the starting valueof the CICs > ;channel=158-186 ;the channels thatare CICs > sigchan=1 ;the signalling channel > > this sigchan has no any CICs defined, so the entire linkset is useless > or missconfigured > > above is suppose to be reserved network. > > context=from-pstn > group=1 > echocancel=no > signalling=ss7 ;this is ss7 signalling > ss7type=itu ;using the ITU variant > ss7_called_nai=international ;NAI for outgoing calls > ss7_calling_nai=dynamic ;NAI for incoming calls > ss7_internationalprefix=00 ;internation prefixvalue for incoming calls > ss7_nationalprefix=0 ;national prefix value for incoming calls > ss7_subscriberprefix=1 ;subscriber prefixvalue for incoming calls > ss7_unknownprefix= ;unknown prefix value for incoming calls > ss7_explictacm=yes ;ACM is send as soon as call enters the > dialplan...may not accepted yet though > linkset=2 ;arbitary name forthis set of channels > pointcode=6700 ;the point code forthis system...aka SPC > adjpointcode=6081;the point code forthe system that we are signalling > to... aka APC > defaultdpc=162 ;the point code forthe system that the CICs will be > negoiated with...aka DPC > networkindicator=national ;NI value for MTP3 > cicbeginswith=3 ;the starting valueof the CICs > channel=3-155 ;the channels thatare CICs > > Are you sure this is the way they are configured at the remote side? > Please check with your peer or capture the signalling after a reconnect > so you can see the groups they are trying to reset. > > we are connecting via STP to default point code. stp is 6081 and DPC is > 162. > > ;channel=33-63 > sigchan=2 ;the signalling channel > > both the CICs range defined and the use of two sigchans from the same > span seems weird to me ... what is the topology of your connection with > the peer? > > sigchan no 1 is for national reserve network 1 and sigchan 2 is for > national reserve network 0 this is what config we got from provider > and btw its not normal ss7 its interconnection with operator. > > here is table for channels > > 1 &2 > 3-31 > > 32-62 > > 63-93 > > 94-124 > > 125-155 > > ? > > On Tue, Aug 13, 2013 at 5:51 PM, Kaloyan Kovachev <kkovachev at varna.net> > wrote: > > On 2013-08-13 15:12, Akib Sayyed wrote: > > Dear All > > I am getting following message on my asterisk ss7 installation > > ERROR[13077]: chan_dahdi.c:14445 dahdi_ss7_error: [2] !! Unable to > handle message of type 0x31 on CIC 3 > > WARNING[13077]: sig_ss7.c:424 ss7_find_cic_gripe: Linkset 2: SS7 GRS > requested unconfigured CIC/DPC 3/161 > > call is established perfect but just wanted to know what these error > and warning means > > It seems you have CICs miss-configuration with the remote side and i > wonder how the call is established at all. > Please show your config > > -- > Akib Sayyed > Matrix-Shell > akibsayyed at gmail.com > akibsayyed at matrixshell.com > Mob:- +91-966-514-2243 [1] [1] > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com [2] > [2] -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 [3] [3] > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com [2] > [2] -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > ? http://lists.digium.com/mailman/listinfo/asterisk-ss7 [3] [3] > > -- > Akib Sayyed > Matrix-Shell > akibsayyed at gmail.com > akibsayyed at matrixshell.com > Mob:- +91-966-514-2243 [1] > > Links: > ------ > [1] tel:%2B91-966-514-2243 > [2] http://www.api-digital.com [2] > [3] http://lists.digium.com/mailman/listinfo/asterisk-ss7 [3] > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com [2] > -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 [3] > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com [2] > -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > ? http://lists.digium.com/mailman/listinfo/asterisk-ss7 [3] > > -- > Akib Sayyed > Matrix-Shell > akibsayyed at gmail.com > akibsayyed at matrixshell.com > Mob:- +91-966-514-2243 [1] > > -- > Akib Sayyed > Matrix-Shell > akibsayyed at gmail.com > akibsayyed at matrixshell.com > Mob:- +91-966-514-2243 > > > > Links: > ------ > [1] tel:%2B91-966-514-2243 > [2] http://www.api-digital.com > [3] http://lists.digium.com/mailman/listinfo/asterisk-ss7 > [4] http://postimg.org/image/o23pd6csn/ > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7
|