Hi Gustavo, There is no IRQ conflit. My card is on an exclusive IRQ. I changed everthing, the cables, the balum, the TDM link... Now the linkset stays up for a more time, about 5 minutes. I even can make calls, But suddenly I get another SIOS from my Telco and the link gets down again: SRR-JT-MGA01*CLI> ss7 show linkset 1 SS7 linkset 1 status: Up SRR-JT-MGA01*CLI> SRR-JT-MGA01*CLI> SRR-JT-MGA01*CLI> [1] Len = 20 [ 81 82 11 81 0d 83 a9 00 11 a0 aa aa aa aa aa aa aa aa aa aa ] [1] FSN: 2 FIB 1 [1] BSN: 1 BIB 1 [1] <[0] MSU [1] [ 81 82 11 ] [1]???? Network Indicator: 2 Priority: 0 User Part: STD_TEST (1) [1]???? [ 81 ] [1]???? OPC 678 DPC 781 SLS 0 [1]???? [ 0d 83 a9 00 ] [1]???? H0: 1 H1: 1 [1]???? [ 11 ] [1] Linkset 1: Processing event: SS7_EVENT_UP [1] Len = 20 [ 82 82 11 81 a6 42 c3 00 21 a0 aa aa aa aa aa aa aa aa aa aa ] [1] FSN: 2 FIB 1 [1] BSN: 2 BIB 1 [1] >[0] MSU [1] [ 82 82 11 ] [1]???? Network Indicator: 2 Priority: 0 User Part: STD_TEST (1) [1]???? [ 81 ] [1]???? OPC 781 DPC 678 SLS 0 [1]???? [ a6 42 c3 00 ] [1]???? H0: 1 H1: 2 [1]???? [ 21 ] [1] [1] Len = 4 [ 82 82 01 03 ] [1] FSN: 2 FIB 1 [1] BSN: 2 BIB 1 [1] <[0] LSSU SIOS [1] [1] Link state change: INSERVICE -> IDLE [1] Link state change: IDLE -> NOTALIGNED Linkset 1: Processing event: Unknown Event [Jun 13 15:41:46] WARNING[2767]: sig_ss7.c:764 ss7_linkset: MTP2 link down (SLC 0) [1] Len = 4 [ ff ff 01 00 ] [1] FSN: 127 FIB 1 [1] BSN: 127 BIB 1 [1] >[0] LSSU SIO [1] [1] Len = 4 [ ff ff 01 00 ] [1] FSN: 127 FIB 1 [1] BSN: 127 BIB 1 [1] <[0] LSSU SIO [1] [1] Link state change: NOTALIGNED -> ALIGNED [1] Len = 4 [ ff ff 01 02 ] [1] FSN: 127 FIB 1 [1] BSN: 127 BIB 1 [1] >[0] LSSU SIE [1] [1] Len = 4 [ ff ff 01 02 ] [1] FSN: 127 FIB 1 [1] BSN: 127 BIB 1 [1] <[0] LSSU SIE [1] [1] Link state change: ALIGNED -> PROVING SRR-JT-MGA01*CLI> ss7 show linkset 1 SS7 linkset 1 status: Up [1] T4 expired! [1] Link state change: PROVING -> ALIGNEDREADY [1] Len = 3 [ ff ff 00 ] [1] FSN: 127 FIB 1 [1] BSN: 127 BIB 1 [1] >[0] FISU [1] [1] Len = 3 [ ff ff 00 ] [1] FSN: 127 FIB 1 [1] BSN: 127 BIB 1 [1] <[0] FISU [1] [1] Link state change: ALIGNEDREADY -> INSERVICE Linkset 1: Processing event: Unknown Event MTP2 link up (SLC 0) [1] Len = 20 [ ff 80 11 81 a6 42 c3 00 11 a0 32 35 36 34 32 38 36 32 38 38 ] [1] FSN: 0 FIB 1 [1] BSN: 127 BIB 1 [1] >[0] MSU [1] [ ff 80 11 ] [1]???? Network Indicator: 2 Priority: 0 User Part: STD_TEST (1) [1]???? [ 81 ] [1]???? OPC 781 DPC 678 SLS 0 [1]???? [ a6 42 c3 00 ] [1]???? H0: 1 H1: 1 [1]???? [ 11 ] [1] [1] Got retransmission request sequence numbers greater than 127. Retransmitting 1 message(s). [1] Len = 20 [ ff 00 11 81 a6 42 c3 00 11 a0 32 35 36 34 32 38 36 32 38 38 ] [1] FSN: 0 FIB 0 [1] BSN: 127 BIB 1 [1] >[0] MSU [1] [ ff 00 11 ] [1]???? Network Indicator: 2 Priority: 0 User Part: STD_TEST (1) [1]???? [ 81 ] [1]???? OPC 781 DPC 678 SLS 0 [1]???? [ a6 42 c3 00 ] [1]???? H0: 1 H1: 1 [1]???? [ 11 ] [1] [1] Len = 20 [ 00 80 11 81 0d 83 a9 00 11 a0 aa aa aa aa aa aa aa aa aa aa ] [1] FSN: 0 FIB 1 [1] BSN: 0 BIB 0 [1] <[0] MSU [1] [ 00 80 11 ] [1]???? Network Indicator: 2 Priority: 0 User Part: STD_TEST (1) [1]???? [ 81 ] [1]???? OPC 678 DPC 781 SLS 0 [1]???? [ 0d 83 a9 00 ] [1]???? H0: 1 H1: 1 [1]???? [ 11 ] [1] Linkset 1: Processing event: SS7_EVENT_UP [1] Len = 20 [ 80 01 11 81 a6 42 c3 00 21 a0 aa aa aa aa aa aa aa aa aa aa ] [1] FSN: 1 FIB 0 [1] BSN: 0 BIB 1 [1] >[0] MSU [1] [ 80 01 11 ] [1]???? Network Indicator: 2 Priority: 0 User Part: STD_TEST (1) [1]???? [ 81 ] [1]???? OPC 781 DPC 678 SLS 0 [1]???? [ a6 42 c3 00 ] [1]???? H0: 1 H1: 2 [1]???? [ 21 ] [1] [1] Len = 20 [ 00 81 11 81 0d 83 a9 00 21 a0 32 35 36 34 32 38 36 32 38 38 ] [1] FSN: 1 FIB 1 [1] BSN: 0 BIB 0 [1] <[0] MSU [1] [ 00 81 11 ] [1]???? Network Indicator: 2 Priority: 0 User Part: STD_TEST (1) [1]???? [ 81 ] [1]???? OPC 678 DPC 781 SLS 0 [1]???? [ 0d 83 a9 00 ] [1]???? H0: 1 H1: 2 [1]???? [ 21 ] [1] I'll make some corrections from eletric infra structure, but I really don't know what more can I do for fix this problem :( thanks a lot! -- Marcus ________________________________ De: Gustavo M?rsico <gustavomarsico at gmail.com> Para: asterisk-ss7 at lists.digium.com Cc: Marcus Vinicius <marc_mcs10 at yahoo.com.br> Enviadas: Quarta-feira, 6 de Junho de 2012 17:45 Assunto: Re: [asterisk-ss7] ALIGNMENT Problem I faced the same problem a few days ago. The E1 looks like ok, no slips, frame errors, etc. But the IRQ misses increases a lot, and the links never comes up. On May 29, 2012, at 5:10 AM, Kaloyan Kovachev wrote: > On Mon, 28 May 2012 18:40:27 -0700 (PDT), Marcus Vinicius > <marc_mcs10 at yahoo.com.br> wrote: >> Hi, >> >> I run ss7linktest with information sent me by telco, but I get the same >> error: >> >> >> ./ss7linktest 16 itu 781 678 >> >> Starting link 1 >> Link state change: IDLE -> NOTALIGNED >> Len = 4 [ ff ff 01 00 ] >> FSN: 127 FIB 1 >> BSN: 127 BIB 1 >>> [0] LSSU SIO >> >> Len = 4 [ ff ff 01 00 ] >> FSN: 127 FIB 1 >> BSN: 127 BIB 1 >> <[0] LSSU SIO >> >> Link state change: NOTALIGNED -> ALIGNED >> Len = 4 [ ff ff 01 02 ] >> FSN: 127 FIB 1 >> BSN: 127 BIB 1 >>> [0] LSSU SIE >> >> Len = 4 [ ff ff 01 02 ] >> FSN: 127 FIB 1 >> BSN: 127 BIB 1 >> <[0] LSSU SIE >> >> Link state change: ALIGNED -> PROVING >> Len = 4 [ ff ff 01 03 ] >> FSN: 127 FIB 1 >> BSN: 127 BIB 1 >> <[0] LSSU SIOS > > Here the other end is closing the connection - noting wrong on your side. > Is the link enabled (and properly configured) at telco side? > >> >> Link state change: PROVING -> IDLE >> Link state change: IDLE -> NOTALIGNED >> Len = 4 [ ff ff 01 00 ] >> FSN: 127 FIB 1 >> BSN: 127 BIB 1 >>> [0] LSSU SIO >> >> Len = 4 [ ff ff 01 00 ] >> FSN: 127 FIB 1 >> BSN: 127 BIB 1 >> <[0] LSSU SIO >> >> Link state change: NOTALIGNED -> ALIGNED >> Len = 4 [ ff ff 01 02 ] >> FSN: 127 FIB 1 >> BSN: 127 BIB 1 >>> [0] LSSU SIE >> >> Len = 4 [ ff ff 01 02 ] >> FSN: 127 FIB 1 >> BSN: 127 BIB 1 >> <[0] LSSU SIE >> >> Link state change: ALIGNED -> PROVING >> Len = 4 [ ff ff 01 03 ] >> FSN: 127 FIB 1 >> BSN: 127 BIB 1 >> <[0] LSSU SIOS >> >> Link state change: PROVING -> IDLE >> Link state change: IDLE -> NOTALIGNED >> Len = 4 [ ff ff 01 00 ] >> FSN: 127 FIB 1 >> BSN: 127 BIB 1 >>> [0] LSSU SIO >> >> >> >> I don't have any slip or crc error. The link looks good, but it can't > gets >> up; >> >> thanks >> >> -- >> Marcus >> >> >> >> >> ________________________________ >> De: Kaloyan Kovachev <kkovachev at varna.net> >> Para: Marcus Vinicius <marc_mcs10 at yahoo.com.br> >> Enviadas: Segunda-feira, 28 de Maio de 2012 11:27 >> Assunto: Re: [asterisk-ss7] ALIGNMENT Problem >> >> try ss7lintest from libss7 with asterisk stopped: >> ss7linktest 16 itu XXX YYY >> >> and see if it will align >> >> On Mon, 28 May 2012 07:05:10 -0700 (PDT), Marcus Vinicius >> <marc_mcs10 at yahoo.com.br> wrote: >>> Hello, >>> >>> The config are correct according from telco: >>> >>> >>> >>> signalling=ss7 >>> ss7type=itu >>> ss7_called_nai=dynamic >>> ss7_calling_nai=dynamic >>> networkindicator=national >>> pointcode=781 >>> >>> linkset=1 >>> pointcode=XXX >>> defaultdpc=YYY >>> adjpointcode=YYY >>> context=from-pstn-01 >>> >>> group=1 >>> cicbeginswith=1 >>> channel=>1-15 >>> >>> cicbeginswith=301 >>> channel=>17-31 >>> sigchan=16 >>> >>> >>> >>> I'll see the cables, but the link is UP: >>> >>> >>> Description? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Alarms? IRQ? ? bpviol CRC? >> Fra >>> Codi Options? LBO >>> AP408 Card 1 Span 1? ? ? ? ? ? ? ? ? ? ? OK? ? ? 0? ? ? 0? ? ? 0? ? >> CCS >>> HDB3? ? ? ? ? 0 db (CSU)/0-133 feet (DSX-1) >>> >>> >>> >>> Thanks a lot >>> >>> >>> -- >>> Marcus >>> >>> >>> >>> >>> ________________________________ >>>? De: Kaloyan Kovachev <kkovachev at varna.net> >>> Para: Marcus Vinicius <marc_mcs10 at yahoo.com.br>; >>> asterisk-ss7 at lists.digium.com >>> Enviadas: Segunda-feira, 28 de Maio de 2012 6:18 >>> Assunto: Re: [asterisk-ss7] ALIGNMENT Problem >>>? >>> Hi, >>> >>> On Thu, 24 May 2012 06:47:28 -0700 (PDT), Marcus Vinicius >>> <marc_mcs10 at yahoo.com.br> wrote: >>>> Hi, >>>> >>>> I can't alignment a libss7 Asterisk with a TDM switch (Huawei/UMG) >>> because >>>> the link doesn't pass the "PROVING" state. >>>> >>>> All configurations are correct according from telco, but I always get >>> the >>>> same logs: >>> >>> check your cables and double check your config for the correct > signaling >>> channel > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: >? http://lists.digium.com/mailman/listinfo/asterisk-ss7 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20120613/1ef70724/attachment.htm>
|