Hello, The config are correct according from telco: signalling=ss7 ss7type=itu ss7_called_nai=dynamic ss7_calling_nai=dynamic networkindicator=national pointcode=781 linkset=1 pointcode=XXX defaultdpc=YYY adjpointcode=YYY context=from-pstn-01 group=1 cicbeginswith=1 channel=>1-15 cicbeginswith=301 channel=>17-31 sigchan=16 I'll see the cables, but the link is UP: Description????????????????????????????? Alarms? IRQ??? bpviol CRC??? Fra Codi Options? LBO AP408 Card 1 Span 1????????????????????? OK????? 0????? 0????? 0????? CCS HDB3????????? 0 db (CSU)/0-133 feet (DSX-1) Thanks a lot -- Marcus ________________________________ De: Kaloyan Kovachev <kkovachev at varna.net> Para: Marcus Vinicius <marc_mcs10 at yahoo.com.br>; asterisk-ss7 at lists.digium.com Enviadas: Segunda-feira, 28 de Maio de 2012 6:18 Assunto: Re: [asterisk-ss7] ALIGNMENT Problem Hi, On Thu, 24 May 2012 06:47:28 -0700 (PDT), Marcus Vinicius <marc_mcs10 at yahoo.com.br> wrote: > Hi, > > I can't alignment a libss7 Asterisk with a TDM switch (Huawei/UMG) because > the link doesn't pass the "PROVING" state. > > All configurations are correct according from telco, but I always get the > same logs: check your cables and double check your config for the correct signaling channel -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20120528/3455bd20/attachment.htm>
|