Hi, I run ss7linktest with information sent me by telco, but I get the same error: ./ss7linktest 16 itu 781 678 Starting link 1 Link state change: IDLE -> NOTALIGNED Len = 4 [ ff ff 01 00 ] FSN: 127 FIB 1 BSN: 127 BIB 1 >[0] LSSU SIO Len = 4 [ ff ff 01 00 ] FSN: 127 FIB 1 BSN: 127 BIB 1 <[0] LSSU SIO Link state change: NOTALIGNED -> ALIGNED Len = 4 [ ff ff 01 02 ] FSN: 127 FIB 1 BSN: 127 BIB 1 >[0] LSSU SIE Len = 4 [ ff ff 01 02 ] FSN: 127 FIB 1 BSN: 127 BIB 1 <[0] LSSU SIE Link state change: ALIGNED -> PROVING Len = 4 [ ff ff 01 03 ] FSN: 127 FIB 1 BSN: 127 BIB 1 <[0] LSSU SIOS Link state change: PROVING -> IDLE Link state change: IDLE -> NOTALIGNED Len = 4 [ ff ff 01 00 ] FSN: 127 FIB 1 BSN: 127 BIB 1 >[0] LSSU SIO Len = 4 [ ff ff 01 00 ] FSN: 127 FIB 1 BSN: 127 BIB 1 <[0] LSSU SIO Link state change: NOTALIGNED -> ALIGNED Len = 4 [ ff ff 01 02 ] FSN: 127 FIB 1 BSN: 127 BIB 1 >[0] LSSU SIE Len = 4 [ ff ff 01 02 ] FSN: 127 FIB 1 BSN: 127 BIB 1 <[0] LSSU SIE Link state change: ALIGNED -> PROVING Len = 4 [ ff ff 01 03 ] FSN: 127 FIB 1 BSN: 127 BIB 1 <[0] LSSU SIOS Link state change: PROVING -> IDLE Link state change: IDLE -> NOTALIGNED Len = 4 [ ff ff 01 00 ] FSN: 127 FIB 1 BSN: 127 BIB 1 >[0] LSSU SIO I don't have any slip or crc error. The link looks good, but it can't gets up; thanks -- Marcus ________________________________ De: Kaloyan Kovachev <kkovachev at varna.net> Para: Marcus Vinicius <marc_mcs10 at yahoo.com.br> Enviadas: Segunda-feira, 28 de Maio de 2012 11:27 Assunto: Re: [asterisk-ss7] ALIGNMENT Problem try ss7lintest from libss7 with asterisk stopped: ss7linktest 16 itu XXX YYY and see if it will align On Mon, 28 May 2012 07:05:10 -0700 (PDT), Marcus Vinicius <marc_mcs10 at yahoo.com.br> wrote: > Hello, > > The config are correct according from telco: > > > > signalling=ss7 > ss7type=itu > ss7_called_nai=dynamic > ss7_calling_nai=dynamic > networkindicator=national > pointcode=781 > > linkset=1 > pointcode=XXX > defaultdpc=YYY > adjpointcode=YYY > context=from-pstn-01 > > group=1 > cicbeginswith=1 > channel=>1-15 > > cicbeginswith=301 > channel=>17-31 > sigchan=16 > > > > I'll see the cables, but the link is UP: > > > Description????????????????????????????? Alarms? IRQ??? bpviol CRC??? Fra > Codi Options? LBO > AP408 Card 1 Span 1????????????????????? OK????? 0????? 0????? 0????? CCS > HDB3????????? 0 db (CSU)/0-133 feet (DSX-1) > > > > Thanks a lot > > > -- > Marcus > > > > > ________________________________ >? De: Kaloyan Kovachev <kkovachev at varna.net> > Para: Marcus Vinicius <marc_mcs10 at yahoo.com.br>; > asterisk-ss7 at lists.digium.com > Enviadas: Segunda-feira, 28 de Maio de 2012 6:18 > Assunto: Re: [asterisk-ss7] ALIGNMENT Problem >? > Hi, > > On Thu, 24 May 2012 06:47:28 -0700 (PDT), Marcus Vinicius > <marc_mcs10 at yahoo.com.br> wrote: >> Hi, >> >> I can't alignment a libss7 Asterisk with a TDM switch (Huawei/UMG) > because >> the link doesn't pass the "PROVING" state. >> >> All configurations are correct according from telco, but I always get > the >> same logs: > > check your cables and double check your config for the correct signaling > channel -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20120528/6b1353dc/attachment.htm>
|