CIC 17 skipped on CGB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 06 Mar 2009 12:33:40 -0600, Matthew Fredrickson wrote
> Kaloyan Kovachev wrote:
> > another problem ...
> >  when CGB for CIC 1 with range 30 is received CIC 17 remains non blocked and
> > when a call is attemted it pickups CIC 17 ... then it gets a BLO (for 17)
> > and when received its is properly put in blocking state.
> > 
> >  The same behavior is on CGB for 17 with range 14 - CIC 17 remains available.
> > On CGB for 1 with range 14 it properly sets 1 to 15 as blocked.
> > 
> >  When local blocking is requested from cli the status is properly displayed.
> > 
> > in chan_dahdi.conf:
> > 
> > cicbeginswith=1
> > channel => 1-15
> > cicbeginswith=17
> > channel => 17-31
> > sigchan=16
> 
> Can you post a debug of this when it's occurring?
> 

Unfortunately i didn't save it, so will need to repeat it on monday, but when
i looked at the debug it was that the other side is sending blocking request
for CIC 1 with range 30 and 'ss7 show cics' shown 17 as idle. At this time
there was a call on CIC 31 (marked as remotely blocked), which was not
interrupted until the other side have sent GRS with the same CIC and range

> Also, can you post your chan_dahdi.conf as well?
> 

here is the ss7 related part located at the end of the chan_dahdi.conf :

signalling=ss7
ss7_called_nai=dynamic
ss7_calling_nai=dynamic
ss7_internationalprefix=00
ss7_nationalprefix=0
linkset=1
networkindicator=national
group=1
callgroup=1
pickupgroup=1
context=Span1
ss7type=itu
pointcode=X
adjpointcode=Y
defaultdpc=Z
cicbeginswith=1
channel => 1-15
cicbeginswith=17
channel => 17-31
sigchan=16
#include ss7.timers

the adjpointcode is different from the defaultdpc and the included file is
with the default timers listed earlier in the config.

and the system.conf content:

# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
#dchan=16
mtp2=16
alaw=1-15,17-31
#echocanceller=mg2,1-15,17-31

# ready for PRI ... change signaling if SS7
# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
span=2,0,0,ccs,hdb3,crc4
bchan=32-46,48-62
dchan=47
alaw=32-46,48-62
#echocanceller=mg2,32-46,48-62

loadzone = bg
defaultzone=bg

> Thanks,
> Matthew Fredrickson
> Digium, Inc.
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7




[Index of Archives]     [Asterisk App Development]     [PJ SIP]     [Gnu Gatekeeper]     [IETF Sipping]     [Info Cyrus]     [ALSA User]     [Fedora Linux Users]     [Linux SCTP]     [DCCP]     [Gimp]     [Yosemite Backpacking]     [Deep Creek Hot Springs]     [Yosemite Campsites]     [ISDN Cause Codes]     [Asterisk Books]

  Powered by Linux