On Fri, 06 Mar 2009 12:32:21 -0600, Matthew Fredrickson wrote > Kaloyan Kovachev wrote: > > Hello list, > > i have the following in chan_dahdi.conf: > > > > signalling=ss7 > > networkindicator=national > > ss7type=itu > > ss7_called_nai=dynamic > > ss7_calling_nai=dynamic > > ss7_internationalprefix=00 > > ss7_nationalprefix=0 > > > > when there is an incoming international call i get '000' at the beginning > > instead of '00'. > > > > I have tried setting ss7_called_nai and ss7_calling_nai to both > > national/international and did 'dahdi restart', but it is still the same, what > > could be wrong? > > Those parameters (IIRC) will not be changed right now except on anything > but a reload of the entire module itself. Probably something I should > change :-) > > To be safe, if you have a chance to restart Asterisk, please do so and > let me know if that fixes it. If it doesn't, it sounds like there might > be a config type bug you might be dealing with. > Well they are changed on 'ss7 show linkset' and i though they where accounted ... will try full restart then on monday, as the link is currently in blocked state ... we are still in test phase, so it is safe :) > Matthew Fredrickson > Digium, Inc. > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7
|