hi
your sustem.conf is wrong
span=1,1,0,ccs,hdb3,crc4
# termtype: te
bchan=1-15,17-31
dchan=16
try this
On Wed, Dec 16, 2009 at 11:07 AM, Junaid Saeed Uppal <junaid.uppal at gmail.com
> wrote:
> Hi All / Wolfgang,
>
> Both of the links came up [ configuration change to CRC4 on both sides and
> i changed the TDMV_DCHAN to 0 as you recommended.
>
> Thanks a lot for your support.
>
> Rgds,
> Junaid
>
> On Wed, Dec 16, 2009 at 8:55 AM, Wolfgang Pichler <wpichler at yosd.at>wrote:
>
>> Hi,
>>
>> i am not an expret here - but have you triied to set
>>
>> TDMV_DCHAN = 0
>>
>> instead of commenting it out ?
>>
>> Maybe it takes a default value if commented out...
>>
>> best regards,
>> Wolfgang
>>
>> 2009/12/15 Junaid Saeed Uppal <junaid.uppal at gmail.com>
>>
>>> Hi Guys,
>>>
>>> This is the first time , I am posting , but have been reading the list
>>> quietly for a while.
>>>
>>> I have a Sangoma A102 , connecting to a Siemens D900 Switch , I cannot
>>> get the link to align at all, The far end switch is Siemens GSM [ SR 13 ]
>>> switch , config from the switch side is NCRC, NAT0 , HDB3 , NO Multiframe ,
>>> BCR
>>>
>>> [root at in-tickets libss7]# ./ss7linktest 16 itu 2259 2256
>>> Starting link 1
>>> Link state change: IDLE -> NOTALIGNED
>>> Len = 4 [ ff ff 01 00 ]
>>> FSN: 127 FIB 1
>>> BSN: 127 BIB 1
>>> >[0] LSSU SIO
>>>
>>> Link state change: NOTALIGNED -> IDLE
>>> Link state change: IDLE -> NOTALIGNED
>>> Link state change: NOTALIGNED -> IDLE
>>> Link state change: IDLE -> NOTALIGNED
>>> Link state change: NOTALIGNED -> IDLE
>>> Link state change: IDLE -> NOTALIGNED
>>> Link state change: NOTALIGNED -> IDLE
>>> Link state change: IDLE -> NOTALIGNED
>>> Link state change: NOTALIGNED -> IDLE
>>> Link state change: IDLE -> NOTALIGNED
>>> Link state change: NOTALIGNED -> IDLE
>>> Link state change: IDLE -> NOTALIGNED
>>>
>>>
>>>
>>> [root at in-tickets libss7]# wanrouter hwprobe
>>> -------------------------------
>>> | Wanpipe Hardware Probe Info |
>>> -------------------------------
>>> 1 . AFT-A102-SH : SLOT=14 : BUS=0 : IRQ=58 : CPU=A : PORT=1 : HWEC=64 :
>>> V=33
>>> 2 . AFT-A102-SH : SLOT=14 : BUS=0 : IRQ=58 : CPU=A : PORT=2 : HWEC=64 :
>>> V=33
>>>
>>> Card Cnt: A101-2=1
>>>
>>> I am using the following version of the software
>>>
>>> 1. Dahdi $Revision: 7539 $, $Date: 2009-11-09 20:32:45 +0100 (Mon, 09 Nov
>>> 2009) $
>>> 2. LibSS7 - trunk
>>> 3. Asterisk - 1.6.2
>>> 4. Centos 5.3
>>> 5. 2.6.18-128 Kernel
>>>
>>> Everything compiles fine and i am able to load dahdi , but the SS7 link
>>> is never aligned and the status is always down
>>>
>>> /etc/dahdi/system.conf
>>> ---------------------------------
>>>
>>> #autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
>>> #autogenrated on 2009-12-16
>>> #Dahdi Channels Configurations
>>> #For detailed Dahdi options, view /etc/dahdi/system.conf.bak
>>> loadzone=us
>>> defaultzone=us
>>>
>>> #Sangoma A102 port 1 [slot:14 bus:0 span:1] <wanpipe1>
>>> span=1,0,0,ccs,hdb3
>>> bchan=1-15,17-31
>>> mtp2=16
>>> #Sangoma A102 port 2 [slot:14 bus:0 span:2] <wanpipe2>
>>> span=2,0,0,ccs,hdb3
>>> bchan=32-46,48-62
>>> mtp2=47
>>>
>>> /etc/wanpipe/wanpipe1.conf
>>> ---------------------------------------
>>>
>>> [devices]
>>> wanpipe1 = WAN_AFT_TE1, Comment
>>>
>>> [interfaces]
>>> w1g1 = wanpipe1, , TDM_VOICE, Comment
>>>
>>> [wanpipe1]
>>> CARD_TYPE = AFT
>>> S514CPU = A
>>> CommPort = PRI
>>> AUTO_PCISLOT = NO
>>> PCISLOT = 14
>>> PCIBUS = 0
>>> FE_MEDIA = E1
>>> FE_LCODE = HDB3
>>> FE_FRAME = NCRC4
>>> FE_LINE = 1
>>> TE_CLOCK = NORMAL
>>> TE_REF_CLOCK = 0
>>> TE_SIG_MODE = CCS
>>> TE_HIGHIMPEDANCE = NO
>>> LBO = 120OH
>>> FE_TXTRISTATE = NO
>>> MTU = 1500
>>> UDPPORT = 9000
>>> TTL = 255
>>> IGNORE_FRONT_END = NO
>>> TDMV_SPAN = 1
>>> #TDMV_DCHAN = 16
>>> #TDMV_HW_DTMF = YES
>>> #TDMV_HW_FAX_DETECT = NO
>>>
>>> [w1g1]
>>> ACTIVE_CH = ALL
>>> TDMV_HWEC = NO
>>>
>>>
>>> /etc/wanpipe/wanpipe2.conf
>>> ---------------------------------------
>>>
>>> [devices]
>>> wanpipe2 = WAN_AFT_TE1, Comment
>>>
>>> [interfaces]
>>> w2g1 = wanpipe2, , TDM_VOICE, Comment
>>>
>>> [wanpipe2]
>>> CARD_TYPE = AFT
>>> S514CPU = A
>>> CommPort = PRI
>>> AUTO_PCISLOT = NO
>>> PCISLOT = 14
>>> PCIBUS = 0
>>> FE_MEDIA = E1
>>> FE_LCODE = HDB3
>>> FE_FRAME = NCRC4
>>> FE_LINE = 2
>>> TE_CLOCK = NORMAL
>>> TE_REF_CLOCK = 0
>>> TE_SIG_MODE = CCS
>>> TE_HIGHIMPEDANCE = NO
>>> LBO = 120OH
>>> FE_TXTRISTATE = NO
>>> MTU = 1500
>>> UDPPORT = 9000
>>> TTL = 255
>>> IGNORE_FRONT_END = NO
>>> TDMV_SPAN = 2
>>> #TDMV_DCHAN = 16
>>> #TDMV_HW_DTMF = YES
>>> #TDMV_HW_FAX_DETECT = NO
>>>
>>> [w2g1]
>>> ACTIVE_CH = ALL
>>> TDMV_HWEC = NO
>>>
>>> /etc/asterisk/chan_dahdi.conf
>>> -------------------------------------------
>>>
>>> [trunkgroups]
>>>
>>> [channels]
>>> context=default
>>> usecallerid=yes
>>> hidecallerid=no
>>> callwaiting=yes
>>> usecallingpres=yes
>>> callwaitingcallerid=yes
>>> threewaycalling=yes
>>> transfer=yes
>>> canpark=yes
>>> cancallforward=yes
>>> callreturn=yes
>>> echocancel=yes
>>> echocancelwhenbridged=yes
>>> relaxdtmf=yes
>>> rxgain=0.0
>>> txgain=0.0
>>> group=1
>>> callgroup=1
>>> pickupgroup=1
>>> immediate=no
>>>
>>> ss7type=itu
>>> signalling=ss7
>>> ss7_called_nai=national
>>> ss7_calling_nai=national
>>> networkindicator=national_spare
>>> linkset=1
>>> pointcode=2259
>>> defaultdpc=2256
>>> adjpointcode=2256
>>> cicbeginswith=1
>>> group=0
>>> channel =>1-15,17-31
>>> sigchan=16
>>>
>>> ss7type=itu
>>> signalling=ss7
>>> ss7_called_nai=national
>>> ss7_calling_nai=national
>>> networkindicator=national_spare
>>> linkset=2
>>> pointcode=2260
>>> defaultdpc=2256
>>> adjpointcode=2256
>>> sigchan=47
>>> cicbeginswith=32
>>> group=0
>>> channel =>32-46,48-62
>>>
>>>
>>> [root at in-tickets asterisk]# wanpipemon -i w1g1 -c Ta
>>>
>>> ***** w1g1: E1 Alarms (Framer) *****
>>>
>>> ALOS: OFF | LOS: OFF
>>> RED: OFF | AIS: OFF
>>> LOF: OFF | RAI: OFF
>>>
>>> ***** w1g1: E1 Alarms (LIU) *****
>>>
>>> Short Circuit: OFF
>>> Open Circuit: OFF
>>> Loss of Signal: OFF
>>>
>>>
>>> ***** w1g1: E1 Performance Monitoring Counters *****
>>>
>>> Line Code Violation : 0
>>> Far End Block Errors : 0
>>> CRC4 Errors : 0
>>> FAS Errors : 0
>>>
>>>
>>> Rx Level : > -2.5db
>>>
>>>
>>> [root at in-tickets asterisk]# wanpipemon -i w2g1 -c Ta
>>>
>>> ***** w2g1: E1 Alarms (Framer) *****
>>>
>>> ALOS: OFF | LOS: OFF
>>> RED: OFF | AIS: OFF
>>> LOF: OFF | RAI: OFF
>>>
>>> ***** w2g1: E1 Alarms (LIU) *****
>>>
>>> Short Circuit: OFF
>>> Open Circuit: OFF
>>> Loss of Signal: OFF
>>>
>>>
>>> ***** w2g1: E1 Performance Monitoring Counters *****
>>>
>>> Line Code Violation : 0
>>> Far End Block Errors : 0
>>> CRC4 Errors : 0
>>> FAS Errors : 0
>>>
>>>
>>> Rx Level : > -2.5db
>>>
>>> Kindly help me out.
>>>
>>> Best Regards,
>>> Junaid
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>
>>> asterisk-ss7 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
--
BIPIN RAGHUVANSHI
OPERATION HEAD
ASTERISK (DEVELOPMENT AND RESEARCH)
WWW.EHORIZONS.IN
011-32323262
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20091218/6b3a5bd4/attachment.htm
|